apexi turbo timer - SRT Forums

ryantomlinsrt · 02-11-2006, 03:23 AM

does anyone know where to find a apexi turbo timer harness for a 2005 srt4?

chubz · 02-11-2006, 03:45 AM

Quote: Originally Posted by ryantomlinsrt

does anyone know where to find a apexi turbo timer harness for a 2005 srt4?

you dont need a harness

ryantomlinsrt · 02-11-2006, 12:03 PM

ya i know that i can hard wire it in but i would rather use a harness b/c it made it a 20 min job on my 98gst. i just want to know if they make one.

04Neonsxt · 02-19-2006, 11:27 PM

Quote: Originally Posted by ryantomlinsrt

ya i know that i can hard wire it in but i would rather use a harness b/c it made it a 20 min job on my 98gst. i just want to know if they make one.

Im almost positive they dont make it for the srt. I have that timer and still havent hooked it up b/c Im not smart enough to hard wire it in.

barreled4ever · 02-20-2006, 08:59 PM

No harness available...had to get mine hardwired..cost me $80

PS...Do you know how to get it to read a/f...is it compatible with wideband?

JdmKiller · 02-23-2006, 10:37 AM

My a/f doesnt read also.

BoostedWhite · 02-24-2006, 08:54 AM

You can't use the SRT-4 O2 sensor for the TT. Get a regular O2 sensor put in then wire up to that. Its really not worth the time.

ryantomlinsrt · 02-24-2006, 12:02 PM

i hard wired it in yesterday it took about 1 hour there is a thread on this site someone did and it was very good it tells you everything made it really easy.

**SilverSerfer** · 02-27-2006, 11:33 AM

There is a How-to here specifically for the Apexi turbo timer.

HOW-TO: Apexi Turbo Timer

05SlvrSRT · 03-03-2006, 04:49 PM

I got mine wired at a local shop for 40 bucks. It took them about an hour to do it.

MunkysSRT4 · 03-03-2006, 04:53 PM

Just use the how to someone already linked in here. I did 2 of them...1 on my car and 1 on a friends. Took me all of 30 minutes both times. Most of that was pulling apart the plastics around the steering column and center console. It's a total of 4 wires being hooked up. This isn't rocket science. Anyone that know's how to use some electrical tape and a wire stripper should be fine.