i need some help - SRT Forums

2.4HEMI · 09-16-2009, 05:10 PM

need some help
Ben, or any one else take a look at that thread and give me some suggestions please.

2.4HEMI · 09-17-2009, 04:05 PM

any one???

2.4HEMI · 09-18-2009, 04:08 PM

i swaped wastegates with a buddy of mine today who has a ebay xspower and put my 14 psi spring in. it doesnt fluctuate in high rpms it will do it however it does do it( but not as bad) on initial spool up from a low rpm pull, it spikes high falls back quickly comes back up a little and holds right to redline. Also when shifting it while hammer down it spikes and then falls quickly to the desired boost level and holds.

Jon@AGP · 09-21-2009, 11:53 AM

What bleed is in your boost controller, and are you sure you do not have it hooked up in reverse?

2.4HEMI · 09-21-2009, 07:23 PM

i actually have it working properly after today i was having trouble getting the valve seat to seat properly even when tightening it down on the manifold but i got it taken car of today, the only thing i dont understand is why it started to happen at random.