AGP ECU Flash Question

[str5010]

I can't find the answer to this on any of the threads. But I have my S1 ecu in the car with the AGP flash. If I flash it back to stock how will it run if I leave the 3-bar map sensor and the AGP TIP sensor mod attached? I figured I would at least have to put the stock MAP sensor back in, but will the car run poorly or any different if I leave the TIP mod spliced in there?

Thanks for any input.

[Ben@AGP]

It's not going to run very well.

[str5010]

Well it doesnt run all that great right now which is why I am doing this. I was just trying to confirm that the sensors had to be replaced and the resistors had to be unspliced everytime this was done.

[Ben@AGP]

and the injectors need to be replaced back to stock.

[str5010]

Quote: Originally Posted by Ben@AGP

and the injectors need to be replaced back to stock.

Wait cant I flash back to my factory S1 ecu map and run on my old DTEC/750s tunes that I remember.

[NoisufnoC]

Please dont run your car w/ the Stage 1 software and 3 bar MAP.

Its a very bad idea.

[str5010]

Quote: Originally Posted by NoisufnoC

Please dont run your car w/ the Stage 1 software and 3 bar MAP.

Its a very bad idea.

Im not I was just asking about the resistors on the TIP.

[uberingram]

Quote: Originally Posted by str5010

Im not I was just asking about the resistors on the TIP.

It will still run poorly since the TIP and MAP are not scaled the same.

[str5010]

Alright so I need to do some unsplicing if I need to flash back. Thanks for verifying that guys.