Show me PICS of your powdercoated Intake Manifolds - Page 4 - SRT Forums

Koehn56 · 12-30-2012, 07:43 AM

Quote: Originally Posted by gearhead89

Anodized Red

That looks really good. Love the turbo for sure.

gearhead89 · 12-31-2012, 01:21 AM

Thanks, i went with the anodized red because its clean and subtle but not overly flashy

SRTbacon · 01-01-2013, 01:28 PM

Quote: Originally Posted by gearhead89

Thanks, i went with the anodized red because its clean and subtle but not overly flashy

How much was it to get that all done if you don't mind me asking? I love that look, I had never considered andonization before.

Srtkr · 01-02-2013, 06:30 PM

Quote: Originally Posted by jay05acr

Srtkr install ur jmf already!

It's getting coated right now, had to pick up all the little extra stuff to run it then have that coated too

lol

Srtkr · 01-02-2013, 06:34 PM

Quote: Originally Posted by gearhead89

Thanks, i went with the anodized red because its clean and subtle but not overly flashy

Love the anodized! Different bunyou can pull it off. My only concern is it holding up to heat. Boomba's anodized doesn't like heat very much.

Millernz123 · 01-02-2013, 07:09 PM

If you go to powder by the pound you can get a anodized powder coat this is where I order all my powders from you just have to use a Chrome coat first before the anodized top coat just like you would for the candys. Here is the link AUSSIE'S ANODIZED RED TRANSPARENT (FLAT)

Black05SRT · 01-02-2013, 08:55 PM

Quote: Originally Posted by mole'

Did you do that work or darksyde?

It looks good.

05blast4 did it. great guy to do business with, and it looks better in person. check out his work at his facebook page.
www.facebook.com/blastcoatings

gearhead89 · 01-02-2013, 11:45 PM

Quote: Originally Posted by Millernz123

If you go to powder by the pound you can get a anodized powder coat this is where I order all my powders from you just have to use a Chrome coat first before the anodized top coat just like you would for the candys. Here is the link AUSSIE'S ANODIZED RED TRANSPARENT (FLAT)

Mine is the powder by the pound 2 stage

gearhead89 · 01-02-2013, 11:46 PM

And yes it holds up great to the heat even on the compressor housing

Millernz123 · 01-03-2013, 03:23 PM

Here are some of the other colors I've done.

Flash Pearl Metallic

Candy Red Sorry for the bad pics this was from the cell phone.

Silver Vein

Blue Candy and Mirror Red

Mirror Red

Black Pearl

Wheels Polished with inside painted Gloss Black.

maroonbeast · 01-05-2013, 07:02 PM

^^^^^ amazing work!

nsrt4 · 01-05-2013, 08:30 PM

Needs a good cleaning

Srtkr · 01-12-2013, 06:43 PM

My God......
Here's my new one

sohcanddohc · 01-12-2013, 08:17 PM

You have to bring it all together. That being said I still need to do my thermostat housing.

SRTbacon · 01-13-2013, 03:35 AM

Wow these past few posts are unreal, such clean work!! That red lightning theme you've got going on above is unreal, I'm lovin it. Also that metallic black IM looks amazing I'd love to see that installed. Same deal with that painted tranny.

01-02-2013, 06:30 PM	#49 (permalink)
Srtkr SRT of the Month Join Date: Aug 2008 Member Number: 66584 Location: Ill noise Posts: 1,489	Quote: Originally Posted by jay05acr Srtkr install ur jmf already! It's getting coated right now, had to pick up all the little extra stuff to run it then have that coated too lol __________________ [x]-DCR [x]-Rage Tek [x]-Apt [x]-Cbd [x]-ccw Sponsored by stätus racing.

01-02-2013, 06:34 PM	#50 (permalink)
Srtkr SRT of the Month Join Date: Aug 2008 Member Number: 66584 Location: Ill noise Posts: 1,489	Quote: Originally Posted by gearhead89 Thanks, i went with the anodized red because its clean and subtle but not overly flashy Love the anodized! Different bunyou can pull it off. My only concern is it holding up to heat. Boomba's anodized doesn't like heat very much. __________________ [x]-DCR [x]-Rage Tek [x]-Apt [x]-Cbd [x]-ccw Sponsored by stätus racing.

01-02-2013, 07:09 PM	#51 (permalink)
Millernz123 SRTforums Member Join Date: Jan 2008 Member Number: 60887 Location: Muncie,Indiana Posts: 213	If you go to powder by the pound you can get a anodized powder coat this is where I order all my powders from you just have to use a Chrome coat first before the anodized top coat just like you would for the candys. Here is the link AUSSIE'S ANODIZED RED TRANSPARENT (FLAT) __________________ http://www.indianasrt.com/ Built motor by Kriegspeed

01-03-2013, 03:23 PM	#55 (permalink)
Millernz123 SRTforums Member Join Date: Jan 2008 Member Number: 60887 Location: Muncie,Indiana Posts: 213	Here are some of the other colors I've done. Flash Pearl Metallic Candy Red Sorry for the bad pics this was from the cell phone. Silver Vein Blue Candy and Mirror Red Mirror Red Black Pearl Wheels Polished with inside painted Gloss Black. __________________ http://www.indianasrt.com/ Built motor by Kriegspeed

01-12-2013, 06:43 PM	#58 (permalink)
Srtkr SRT of the Month Join Date: Aug 2008 Member Number: 66584 Location: Ill noise Posts: 1,489	My God...... Here's my new one __________________ [x]-DCR [x]-Rage Tek [x]-Apt [x]-Cbd [x]-ccw Sponsored by stätus racing.

12-30-2012, 07:43 AM	#46 (permalink)
Koehn56 SRTforums Member Join Date: Nov 2012 Member Number: 91401 Location: Tampa Bay,Fl Posts: 10	Quote: Originally Posted by gearhead89 Anodized Red That looks really good. Love the turbo for sure.

12-31-2012, 01:21 AM	#47 (permalink)
gearhead89 SRTforums Member Join Date: Jul 2010 Member Number: 80379 Location: Reno, NV Posts: 233	Thanks, i went with the anodized red because its clean and subtle but not overly flashy

01-01-2013, 01:28 PM	#48 (permalink)
SRTbacon SRTforums Member Join Date: May 2012 Member Number: 89219 Location: BC Posts: 106	Quote: Originally Posted by gearhead89 Thanks, i went with the anodized red because its clean and subtle but not overly flashy How much was it to get that all done if you don't mind me asking? I love that look, I had never considered andonization before.

01-02-2013, 08:55 PM	#52 (permalink)
Black05SRT SRTforums Member Join Date: Dec 2004 Member Number: 21247 Location: Miami, Florida Posts: 26	Quote: Originally Posted by mole' Did you do that work or darksyde? It looks good. 05blast4 did it. great guy to do business with, and it looks better in person. check out his work at his facebook page. www.facebook.com/blastcoatings

01-02-2013, 11:45 PM	#53 (permalink)
gearhead89 SRTforums Member Join Date: Jul 2010 Member Number: 80379 Location: Reno, NV Posts: 233	Quote: Originally Posted by Millernz123 If you go to powder by the pound you can get a anodized powder coat this is where I order all my powders from you just have to use a Chrome coat first before the anodized top coat just like you would for the candys. Here is the link AUSSIE'S ANODIZED RED TRANSPARENT (FLAT) Mine is the powder by the pound 2 stage

01-02-2013, 11:46 PM	#54 (permalink)
gearhead89 SRTforums Member Join Date: Jul 2010 Member Number: 80379 Location: Reno, NV Posts: 233	And yes it holds up great to the heat even on the compressor housing

01-05-2013, 07:02 PM	#56 (permalink)
maroonbeast SRTforums Member Join Date: Dec 2012 Member Number: 91549 Location: sugarland Posts: 1	^^^^^ amazing work!

01-05-2013, 08:30 PM	#57 (permalink)
nsrt4 SRTforums Member Join Date: Dec 2010 Member Number: 82349 Location: NY Posts: 551	Needs a good cleaning

01-12-2013, 08:17 PM	#59 (permalink)
sohcanddohc SRTforums Member Join Date: Feb 2006 Member Number: 38494 Location: North Alabama Posts: 1,037	You have to bring it all together. That being said I still need to do my thermostat housing. __________________

01-13-2013, 03:35 AM	#60 (permalink)
SRTbacon SRTforums Member Join Date: May 2012 Member Number: 89219 Location: BC Posts: 106	Wow these past few posts are unreal, such clean work!! That red lightning theme you've got going on above is unreal, I'm lovin it. Also that metallic black IM looks amazing I'd love to see that installed. Same deal with that painted tranny.

Remove Advertisements Sponsored Links
SRT Forums - SRT4, SRT6, SRT8, SRT10 & Dodge Forum Advertisement

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode