painted crosshairs and lip

[juppes_Srt-4]

to paint the crosshair and lip black on my car, what brand of paint should i use i want this to come out as good as possible the bumper is off the car waiting for the front mount to come in so i want to do it while im waiting. any imput would be nice tip and tricks apprciated

[LilSparkPlug]

Wetsand with 400 grit, and use a decent basecoat like SEM or Mopar in black, and then a good spray can clear coat like UPOL Clear No.1. It has the highest gloss you can get from a spray can while being UV protected (most spray cans are not).

Use 3M fineline tape to mask it off properly. Right before you spray, clean with wax/tar/grease remover or dawn (or anything similar). Then spray two to three coats of base and two coats of clear.

[juppes_Srt-4]

heres the outcome.. hope you guys like

[FunWheelDrive]

Id have to see it on the car.

[SRT Jeff]

Spark got it right use SEM satin black trim paint and 400 grit. Any left over your a/b/c pillars will love it. SEM costs a little more but well worth it. Resto shops use it.