First time to the track on the built motor low boost - SRT Forums

mhanmer87 · 08-16-2009, 10:19 PM

its been 5 months since i had my car and the last time it saw the track was last august lol so i wasnt looking for smoking times but the motor is stock compression custon je pistons bored to a 2.5 eagle rods all arp fasteners dcr oil kit dcr 5 layer head gasket fresh head with new valve guides and freshened up tranny with act 6 puck lightweight flywheel and hd pressure plate agp 50 trim and 100% meth on 18.5 pounds because i am tuning with the AEM fic and its not wanting to take a base map so we took the 750s out put stage 3 injectors in it and sprayed a 100% meth so i was hoping to crack 12s klike i said its been a while since iv been to the track on m and h 24.5 slicks
afrs 11.6 0 kr
r/t .178
60 ft 1.909
330- 5.636
1/8 -8.345
mph- 93
1000-10.637
1/4 12.55
mph- 118.0

throwing the 750s in tuning with the fic hooking up wot box/ 2 step and turning the boost up to 28 this coming weekend. But all in all i was happy for wat it was

ReDsRtKiD · 08-16-2009, 11:18 PM

not bad @ all for only 18psi.

25mph on the back half is a very nice pick-up.

this thing on 28psi is gonna BOOGIE.

mhanmer87 · 08-17-2009, 06:12 AM

thanks man i hope it does i hope i can get the 60ft down with the 2 step thats the main thing that i noticed i needed to work on

bluebeast · 08-17-2009, 06:21 AM

Good trap speed. That cars got alot left in it.

mhanmer87 · 08-17-2009, 02:57 PM

i hope its a monster when the head is complete and idk wat it was but the slicks im running 24.5 x 8.5 were rubbing on the driver side only just barely on the inside of the slick im guessing its hitting the perch of the strut but i could be wrong it wasnt on the passenger side so who knos

dansrt4 · 08-17-2009, 03:07 PM

cool beans

NIVO88T · 08-17-2009, 03:14 PM

Pretty good for 18psi, you picked up decent speed at the top.

srt4me18 · 08-17-2009, 03:50 PM

good run man

SlicksMH · 08-18-2009, 03:55 PM

Good Job mhanmer87.

SlicksMH

BDCarrillo · 08-28-2009, 12:05 PM

Quote: Originally Posted by mhanmer87

i hope its a monster when the head is complete and idk wat it was but the slicks im running 24.5 x 8.5 were rubbing on the driver side only just barely on the inside of the slick im guessing its hitting the perch of the strut but i could be wrong it wasnt on the passenger side so who knos

What suspension setup are you running, and what rim for the slicks?

mhanmer87 · 08-28-2009, 03:19 PM

its an acr car so acr suspension with s techs and rota slipstreams 15 X 8 with a 8 mm spacer