Is a 7.3 in the 1/8 possible?

[909Sxt]

I wanna know if its possible on my mods to cut a 7.3 in the 1/8th. My mods are:
Hahn's Race Craft 20g w/49lb wheel
custom external wga spring over 15lbs
external dump
custom short ram intake
msd wires
ngk4306 plugs
quick whips df fmic
cooling mist w/i (windshield washer resevour)
thermal r&d turbo back exhaust (no cat)
dw650's

going in soon (crane 12's, ported itm/tb, phrozens wot/2-step, rtl, slicks)

What else am I missing guys to run 11's?

My last time at the track w/o the external gate and dump and w/i was 13.6@ 104 on street tires in the 1/4

[ibnzmonkey]

easily, with slicks. my buddie sxtsrt ran 7.3 in the 1/8th with stg3 and a bunch of boltons.

[ritfordprobe]

I wouldn't say easily..... I went 7.9 @ 95.5 with slicks, cutting a 1.91 60'. If you get that down to a low 1.7 or high 1.6, thats still only in the 7.7 or 7.6 range. You REALLY have to be moving out of the hole to go 7.3. Your mods are good, and you may have the power to do it, but it will not be easy by any means.

[moparmansrt4]

Post vids I want to see this mean machine run!

[909srt4]

7.3 is pretty hard to do ,I dont think you can with the setup you have mention above.

[909Sxt]

Quote: Originally Posted by 909srt4

7.3 is pretty hard to do ,I dont think you can with the setup you have mention above.

Damn that's gonna make me try harder now

[MonsterLemon]

Quote: Originally Posted by 909Sxt

Damn that's gonna make me try harder now

I want a ride in the beast d. Hopefully my meth goes in sat this 100+ heat is destroying my car

[Pablo]

A 7.3 is not going to be easy, a guy I know has ran a 7.35@100 and his 1/4 was 11.30@126 so you're basically shooting for the same thing.

[MonsterLemon]

Quote: Originally Posted by Pablo

A 7.3 is not going to be easy, a guy I know has ran a 7.35@100 and his 1/4 was 11.30@126 so you're basically shooting for the same thing.

[909Sxt]

Quote: Originally Posted by Pablo

A 7.3 is not going to be easy, a guy I know has ran a 7.35@100 and his 1/4 was 11.30@126 so you're basically shooting for the same thing.

Im willing to work my ass off for that goal

[stxsrt]

Quote: Originally Posted by ibnzmonkey

easily, with slicks. my buddie sxtsrt ran 7.3 in the 1/8th with stg3 and a bunch of boltons.

[addictedtosin]

Its all about the 60 ft to get a 7.3 you will probably have the power just need to put it all down to the track.

[909Sxt]

Quote: Originally Posted by MonsterLemon

I want a ride in the beast d. Hopefully my meth goes in sat this 100+ heat is destroying my car

Now prob DJ right now Im just awaiting my clutch so that way I can get the rest of the stuff on and dyno tuned @ 26lbs

[909Sxt]

Quote: Originally Posted by addictedtosin

Its all about the 60 ft to get a 7.3 you will probably have the power just need to put it all down to the track.

So what do you guys suggest that will help to put it down to the ground? I know I have slicks and traction bars, I'll be ordering phrozen's wot box/2-step

[srt4me18]

Im gonna say No def. not easy and probably wont happen