Most of the large stock stuff is gone, there are some stuff left but too numerous to list, so it is better you ask for something and I can see if we have it still. This is for the stock stuff.
I have some aftermarket pistons but they are the low compression ones from Nemo. Some of the spare aftermarket stuff I plan on putting into a spare 'built' engine.
i finally got around to intalling a few parts i had lying around...still have a bunch more but i dont have enough time off to do everything at once...
this is the little setup i made for my feed and return so that if i have to ever pull the motor again, i dont have to have a bunch of fuel line lying all over the place...just remove whats in the engine bay...
looks good. like your feed/return set up.
where did u get that return line?
are you talking about the "hose" its self...you can get the hose from jegs or summit...its earls performance prolite 350 hose...i didnt purchase a pre-made kit if that is what you are asking...i pieced everything together...
Wes,
You didn't have any problems running the fuel line like that? I thought people were having issues with the fitting hitting the themostat housing. This is pretty much the same route I am going with my fuel set up. Looks really good
thanks man...at first i had a prob because the fittings that i purchased did it the thermo housing...when i finally got around to installing it all the other day, i just ran down to the hardware store and picked up a 90 degree flare fitting that worked out perfect...
-wes
AutoForums.com is the premier network of enthusiast-owned
enthusiast-operated automotive communities.
We operate more than 100 automotive forums where our users consult peers for shopping information and advice, and share
experiences and opinions as a community.
![05 Srt-4 [NE]'s Avatar](http://www.srtforums.com/forums/../forums/customavatars/avatar39744_2.gif){kind=avatar}
I've Added A Few Things Since This Pic
Linear Mode
