deck install

[canucksrt]

Hello,

I read somewhere on here how to remove the center console's plastic trim to get at the stock head unit but I tried and it seemed to be stuck. Are there screws anywhere or is it all clips? Also if I have a pioneer deck 52Wx4 will the stock speakers be ok hooked up to the deck?

Thanks.

[SRTStealth]

Remove the 2 vents, look up 2 screws the rest is clips. Pull the HVAC knobs out otherwise they'll go flying when you just pop the bezel off.

[PoloBoy12]

Quote: Originally Posted by SRTStealth

Remove the 2 vents, look up 2 screws the rest is clips. Pull the HVAC knobs out otherwise they'll go flying when you just pop the bezel off.

-allow me to add..... Use a flathead screwdriver on the inside edge of the vents to prop them out... and the rest is already stated. a few screws and clips and your done.

[CrEaTrE]

Just realized I didn't have one in my sticky. Here's a fairly basic Headunit install write up a guy did, and this should answer any of your questions you still might have.

How To: Install Jensen Flip Up Head Unit