Stage 1 Computer with Stage 2 mopar WGA - SRT Forums

Z24SRT9004 · 08-15-2009, 11:16 AM

I've read a few threads on this, but I wanted feedback from the Canadian forums... Is this safe to do? Do any of you guys have this setup and can give me any feedback?

Thanks

jjo · 08-15-2009, 01:14 PM

I had a similar setup w/ S1 and AGP wga.
Was then boostin 18 psi (not) on PCM controlled boost.
Skittle was quick but had some PTB to contend with.
Just get used to it...

neon_night_rider · 08-15-2009, 10:58 PM

stage1 and agp wga is a great combo to go with

Z24SRT9004 · 08-16-2009, 09:26 PM

Thanks for the input guys... anyone else??

EvilTwinSRT · 08-17-2009, 03:59 AM

You'll be fine. I had S1 and a AGP WGA, great first mods to have.

05ACR/88shelby · 08-17-2009, 06:21 AM

stage 1 and fm wastegate on stock vac line holds 17-18psi. i also have ed super beast intercooler since i put that in ptb went away.

AltersEgo · 08-17-2009, 02:07 PM

I ran this setup before. Even ran it on the 20G turbo with a DTEC. It was a pretty good setup.

Rugger · 08-18-2009, 04:12 PM

Quote: Originally Posted by neon_night_rider

stage1 and agp wga is a great combo to go with

What both these guys above suggested is pretty much correct, however I found that using a Forward Motion waste gate almost completely eliminates PTOB (part throttle over boost, and I tried most waste gates out there,seriously, not much compares with the Forward Motion WG.

Steve (GLH) brought the FM waste gate to my attention couple of years ago and have never had a single issue with it,nada, zilch, period!!!