August SRT of the Month winner -- bitts

[bitts]

Sponsored by

First off I would like to thank for all those who nominated me to be up against a few other good looking SRT's.
Also for those (almost 200) people who voted for me

I first saw the NSRT4 at a Auto and Truck show back in 2003 and knew I would get one and then when I traded in my PT Cruiser , in January of 2005 and I picked her up a Fiesta Auto Center with 12miles on her.

Over the years I got help from the San Antonio guys and East Tennessee guys (cant forget ya)
Id like to to thank the city of San Antonio for all the highway miles of dyno tunning
Also like to lastly thank the srtforums for the sweet ass deals I have gotten on parts over the years, this car keeps me out of trouble so im glad I have her e

Last~ It cost to be the boss

Mods: aka Under the hood.

Tuned by MindMelt (Brian) @ Hennessey 405/435 on pump on old set-up.

All the work was done by me and the cool ass SA guys (NOSA) JJ&B






- AGP S256(.63ar) 25lbs (OLD)
-Garrett gt35R/ Precision (CURRENT)
- JMB 4in Intake
- TiAl 38mm WG
- DW 750's
- DSP
- bitts MAP sensor relocate
- bitts custom SEE
- bitts custom fuel rail with e. fpr
- bitts P/P Intake manifold
- bitts custom Thermostat relocate
- bitts upper radiator hose
- bitts Tranny cover
- bitts 2 rear mounted meth tanks
- Mopar STS with bitts ABS shiter ball
- Walbro 255
- LFS 60mm TB
- ATP UPP
- Battery re-locate to the trunk
- HKS SSQ BOV
- N2MB WOT/2 step Box
- AEM WB
- Aeroforce Scan Gauge
- 30/30 Colbalt boost gauge
- Devils own Direct port water/meth inj.
- TurboXS HPBC
- Boomba Motor mounts
- QW FMIC
- CM Stage 3 Clutch
- Raptor Shift light
- 2.0 cams
- Findanza adjustable gears
- 2 HD Catch cans
- 3bar/TiP
- c/f rad. cover
- Stock coil/wires
- NGK plugs
- BS delete
- S0 PCM
- RageTek 3/4shift Fork
- and yes its a stock bottom end
- Mopar flat top pistons

I know Im going to miss something.


Suspension :

- P/C ACR bbs 16in wheels on 250/45/16 rubber
- Tien S- Techs (front)
- Mopar S1's (rear)
- Ebay rear strut bar

Body:

- bitts Projector retros 8k
- bitts ABS fog light covers
- Seibon c/f Hood
- Unknown c/f Trunk w/no key hole/3rd brake light
- PVO c/f wing
- Passenger airbag delete
- HD lip mod
- Rolled rear bumper
- LED tails/stockers
- Cross hair delete
- Painted end tanks on FMIC
- Blacked out side markers
- AGP badge on trunk
- 3rd brake light on back window
- Sunroof that never works
- Revamped Cluster bulbs

Powder Coated:
~ all black except VC

- Darksyde Valve Cover
- Tranny cover
- Side exit exhaust heat plate
- Intake mani
- BBS Wheels
- UPP pipe
- 4in intake
- Upper/lower thermostat housing




















[/quote]

[bitts]

.

[Flame]

Congratulations.

[bitts]

Thanks man

[SRT-4runner]

How did this win?



















JK, i voted for juuu!

[conroy9940]

congrats mang

[mightyxwhitey53]

well deserved adam!

[coltf1991]

Congratz Homie. Bad A$$ Texas SRT!

[cody187x]

One of my favorite blacks, definately didnt think id be running with this thing for srtotm

[lyncoo]

i call bs. congrats

[SrT4de]

congrats again adam

[kirbyxray]

Quote: Originally Posted by bitts

Sponsored by

First off I would like to thank for all those who nominated me to be up against a few other good looking SRT's.
Also for those (almost 200) people who voted for me

I first saw the NSRT4 at a Auto and Truck show back in 2003 and knew I would get one and then when I traded in my PT Cruiser , in January of 2005 and I picked her up a Fiesta Auto Center with 12miles on her.

Over the years I got help from the San Antonio guys and East Tennessee guys (cant forget ya)
Id like to to thank the city of San Antonio for all the highway miles of dyno tunning
Also like to lastly thank the srtforums for the sweet ass deals I have gotten on parts over the years, this car keeps me out of trouble so im glad I have her e

Last~ It cost to be the boss

Mods: aka Under the hood.

Tuned by MindMelt (Brian) @ Hennessey 405/435 on pump on old set-up.

All the work was done by me and the cool ass SA guys (NOSA) JJ&B






- AGP S256(.63ar) 25lbs (OLD)
-Garrett gt35R/ Precision (CURRENT)
- JMB 4in Intake
- TiAl 38mm WG
- DW 750's
- DSP
- bitts MAP sensor relocate
- bitts custom SEE
- bitts custom fuel rail with e. fpr
- bitts P/P Intake manifold
- bitts custom Thermostat relocate
- bitts upper radiator hose
- bitts Tranny cover
- bitts 2 rear mounted meth tanks
- Mopar STS with bitts ABS shiter ball
- Walbro 255
- LFS 60mm TB
- ATP UPP
- Battery re-locate to the trunk
- HKS SSQ BOV
- N2MB WOT/2 step Box
- AEM WB
- Aeroforce Scan Gauge
- 30/30 Colbalt boost gauge
- Devils own Direct port water/meth inj.
- TurboXS HPBC
- Boomba Motor mounts
- QW FMIC
- CM Stage 3 Clutch
- Raptor Shift light
- 2.0 cams
- Findanza adjustable gears
- 2 HD Catch cans
- 3bar/TiP
- c/f rad. cover
- Stock coil/wires
- NGK plugs
- BS delete
- S0 PCM
- RageTek 3/4shift Fork
- and yes its a stock bottom end
- Mopar flat top pistons

I know Im going to miss something.


Suspension :

- P/C ACR bbs 16in wheels on 250/45/16 rubber
- Tien S- Techs (front)
- Mopar S1's (rear)
- Ebay rear strut bar

Body:

- bitts Projector retros 8k
- bitts ABS fog light covers
- Seibon c/f Hood
- Unknown c/f Trunk w/no key hole/3rd brake light
- PVO c/f wing
- Passenger airbag delete
- HD lip mod
- Rolled rear bumper
- LED tails/stockers
- Cross hair delete
- Painted end tanks on FMIC
- Blacked out side markers
- AGP badge on trunk
- 3rd brake light on back window
- Sunroof that never works
- Revamped Cluster bulbs

Powder Coated:
~ all black except VC

- Darksyde Valve Cover
- Tranny cover
- Side exit exhaust heat plate
- Intake mani
- BBS Wheels
- UPP pipe
- 4in intake
- Upper/lower thermostat housing

[/quote]



Congrats ADAM to one bad ass SRT4 and one cool dude!!
( i miss S.A)

[stopteKsrT]

sweet ride

[bitts]

Ill be ready for the SRTOTYear

[lblackneon]

Congrats on the win!