Hey so when is the date for this BBQ,i need to kno so i can get off of work.and im down for whatever and if i need to bring something i will.just let me know the date and time.
Ok so Im thinking we should have a big Oklahoma car meet/BBQ.
Date: June 21 2008
Time: 1 pm
Location: Earlywine Park
We can either all meet up and eat at a resturant or get money together and have a BBQ. Any ideas are welcome.All make & model of cars are welcome. This is posted on all the local car websites. I am trying to get everyone in the import/subcompact scene together.
DEJAVU LOL!
__________________
471hp 521tq street tune best et 11.4 @ 128 1.906 60ft. "BONE STOCK" fast women and hot cars yeahhhh!!!
Got a question, and any input would be greatly appreciated. I installed my msd super conductor today, and after the install I couldn't get above 5-10 pounds of boost. Any ideas?
__________________
Stage 2 w/o toys, big fmic, tein s-tech springs, ed 3" o2 housing, ed 3"dp, custom 3" exhaust, ns mbc, boomba fuel rail, dcr 65mm tb, msd ignition, weapon r pressure pipe, hks bov
haven't been on here in a lil while.....but had a couple questions....
does anybody know who owns the red skittle with blacked out tails,black stock rims, and single exit exhaust with able racing and one other decal @ david stanley on the southside is???? i guess it was traded in... i saw it in the VERY back when my dad was lookin' to buy a car...just interested in the car....
I am selling my black 05 if you might be interested.
Asking $15000 and is has 36700 miles.
It sits on a new set of Falken 912 tires mounted on polished 17x7 Centerline Storms (5 spokes)
It has average mods as well as polyurethane front lower control arm bushings to reduce wheel hop.
It also has the Viper seats, sunroof, and Kicker Livin' Loud system-which sounds great!
well you can get a new fork and tob,but the hydraullic one is 300$ i think i have not been on rage tek for some time now. but the hydraullic TOB enables you to bleed the system since our system is not and you wont have to worry about the throw our fork wearing on you again. to me it was worth it and it makes shifting like butta! and no problem man let me know when you have a weekend and we can drop the transmission then you can wait until you get your clutch then il come back over to help put it in. unless you want to do it all one weekend?
Just got the tracking # and the clutch should be here on thursday so I can work on it this weekend.
Quote: Originally Posted by andrewsboots
If this LS/VTEC project ever gets out of my driveway, we can actually work on our cars. I can help you install the clutch. It's going to be an expensive pain in the ass. just a heads up.
Don't worry bout the slow LS/VTEC project being in the way we can just do it at my place in the parking lot if anybody says anything I really don't care cause I'm moving anyway. We can put all the tools in the back of the magnum.
__________________
Empathy is preyed upon the weak and feeble minded fools;
One must employ apathy to attain true strength and sound mind.
Just got the tracking # and the clutch should be here on thursday so I can work on it this weekend.
Don't worry bout the slow LS/VTEC project being in the way we can just do it at my place in the parking lot if anybody says anything I really don't care cause I'm moving anyway. We can put all the tools in the back of the magnum.
All we need is a tranny jack, I'll call a few people, try to borrow one.
with a tranny jack you will have one up on my.i had a 2 1/2 ton jack to raise and lower my tranny lol. i also used the cars little jack as well to center it. i did my best on what tools i had. yea i think im pretty free this weekend if i can make it ill let you know. do you and andrew have all the tools covered?
__________________
SRT-4 is built in the US with 84% US content.
A New 06-07 Mustang is built in the US with 64% US content and does not legally qualify to use the term "Made in the USA". How's that for an import? Stock turbo/ 3'cai, 3"O2 housing, 3"DP, AGP WGA, mild port head w/3angle valve job w/crane springs retainers,2.0 cams w/fidanza gears, ED hard pipes, hks bov,fullybuilt ported 55mm tb. thats just the begining
with a tranny jack you will have one up on my.i had a 2 1/2 ton jack to raise and lower my tranny lol. i also used the cars little jack as well to center it. i did my best on what tools i had. yea i think im pretty free this weekend if i can make it ill let you know. do you and andrew have all the tools covered?
i got all the tools i think. I have an ATV/motorcycle lift that I used to do my clutch but it was such a pain in the ass.
AutoForums.com is the premier network of enthusiast-owned
enthusiast-operated automotive communities.
We operate more than 100 automotive forums where our users consult peers for shopping information and advice, and share
experiences and opinions as a community.
Linear Mode
