If someone has an extra set that I can buy. Please let me know.
Oreilly's here in moore got them next day for me awhile back so you might try that.
As for the map clamp we will tune it on pump and leave it safe and since it is cold it will just get richer the warmer it gets so you will be good until you can afford a wideband and still pick up some topend powa, the spring mod is just a poor mans wastegate and the ones I make have seen many months without issues. They will sometimes loosen up the first day or 2 but once they are "broke in" they seem to hold up quite well. I ran one on my new srt for 3-4 mo. no problems then I got a WG.
__________________
471hp 521tq street tune best et 11.4 @ 128 1.906 60ft. "BONE STOCK" fast women and hot cars yeahhhh!!!
yes im awaiting the money from my 60 trim to give to jeff. i get on here late at night since im a vampire now working graveyards. the guy i sold it to said he sold his W7 and planned on giving me the money friday morning. so we will see how well that will go. ill just give you the money jeff on Saturday when we go to the dyno. does that sound good to you?
im making sure no one else wants race fuel im buying it when i wake up tommorow. if you need to install stuff we have all the right tools at my house here to hook stuff up. if not im sure andre will not care if we use a few tools to do a few mods.
__________________
SRT-4 is built in the US with 84% US content.
A New 06-07 Mustang is built in the US with 64% US content and does not legally qualify to use the term "Made in the USA". How's that for an import? Stock turbo/ 3'cai, 3"O2 housing, 3"DP, AGP WGA, mild port head w/3angle valve job w/crane springs retainers,2.0 cams w/fidanza gears, ED hard pipes, hks bov, ported 55mm tb. thats just the begining
You don't need any mods to install + tune and get some power out of a map clamp. Just remember not to mess with it afterwards, without a wideband 02 and you should be fine.
I need to install a mapclamp. Does Abel have them on hand? Also how much extra does it cost to tune the mapclamp on the dyno? $175? Is this a go for Sat?
I need to install a mapclamp. Does Abel have them on hand? Also how much extra does it cost to tune the mapclamp on the dyno? $175? Is this a go for Sat?
OK as of thurs morning they where still working on getting the dyno all up and running ,but anticipated it being done thurs or friday so sat should work but I will know more today. As for the mapclamps Kyle said he would make some and I know able had a few so you should be covered. The tuning side is up to Able and I'm sure depends on the # of pulls needed to get it set but I would assume 100 or so would cover it. Since we are doing the tuning and it will be fairly simple and shouldnt take too many pulls to get set. As for the install kyle was saying he would be installing them which included soldering I hope for like 15-20 but it is fairly simple if you know how to solder I did mine in my driveway in about 10 min.( wires ran and hidden everything).
AutoForums.com is the premier network of enthusiast-owned
enthusiast-operated automotive communities.
We operate more than 100 automotive forums where our users consult peers for shopping information and advice, and share
experiences and opinions as a community.
Linear Mode
