Time to part the car out... - SRT Forums

silverwoolley · 06-03-2008, 10:11 AM

edit : list below!

Im going to get started on the car today. If you guys need anything, im in Lakewood and I'm hoping to get a lot of interest from you guys so I dont need to ship much. I dont really have time right now to make a list or get pics. up but I will later once parts start to pile up. Shoot me a PM or give me a call for info on any parts. Im sure I will have something that you can use.

-Jon 757 943 7983

OrangePTPgirl · 06-03-2008, 11:16 AM

I will have Jacob give you a call, I am sure he needs some parts.

Checksum · 06-03-2008, 12:01 PM

What gauges did you have in it? I could use an oil pres and egt if you have them, as well as pod.

Tommy the SRT · 06-03-2008, 12:37 PM

Did you have a wideband, or fuel controller. I need both of those. What kind of WG did you have on

radicalmark29 · 06-03-2008, 05:26 PM

i need a boost guage that goes over 20psi

valeriekay_2000 · 06-03-2008, 05:35 PM

I'll take the stock gauge pod if it's still in good condition.

ptperformance · 06-03-2008, 07:32 PM

Motor and head... trans??? John, keep me posted on what all is good or better yet I would love to swing by and take a look at the car.

Hi N Mity · 06-03-2008, 08:05 PM

what kind of seats, and what condition?

tyeayo · 06-03-2008, 08:25 PM

Remember wooley, I sent the FIRST PM

MyGreenMachine · 06-03-2008, 10:23 PM

vultures

silverwoolley · 06-03-2008, 11:20 PM

Ok I havent taken much off yet but this is what its looking like...

Stage 3 KIT - PTP Big Wheel Turbo and Form and Function ported polished ceramic coated manifold - 3in o2 housing - Stage 3 E.C.U. - 255lph Walbro - AGP WGA - $3000

Engine (20K miles) DCR Oil Mods for removed balance shaft - Offers

PTP Stg 3 Clutch (1K miles) $450

Needswing E-Cut downpipe with high flow cat ( 3 in. pipe to rear axle for a little more) - $350

Hotchkis F+R Sway bars (have to see if front is still good) - $200

BC Rear coilovers (fronts are done for) - Offer?

DC Sport Front strut bar (orange) - $80

Mopar Rear strut bar - $225

4 Point bolt in rear roll cage (padding too) - Offers??

Momo Steering Wheel - $175

AGP fuel return line (line may have a leak that connects to fuel rail no way for me to know right now) $200 for this reason. may be good though

PWerks Cryotreat and WPC process Input shaft - $400

Stg 3 Coolingmist Pump (trunkmount pump mounted on tank with controller. Nozzles were lost but have tie downs) - $300

W.O.T. box - $200

SAFC Version I - small mark on screen cant turn it on to see what it looks like - $50

AEM Wideband - $200

Viper style seats - $500 (sooo many people are after these so they will sit at $500 for awhile)

55mm ported throttle body and 60mm spacer (lorenzo??) you should look at this because one of the sensor housing may be messed up - $ 100

Toy Box - have to check wires??

Crane 14 Cams - $275

LSD - offer??

Rear bumper (black but not stock black so will need paint) (rolled) - $150

Mounted slicks - $400

Traction Bars - $100

Greddy RS - $100

Fake RS - $20

Synapse BOV (needs 2 vacuum nipples) - $100

Stock filled trans mount - $25

Camber kits - $40

Carbon Fiber fog light covers ( 1 is a little ate up but will look good a few steps away) - $40

Kicker sub - Offers

LED tail lights (pass. side has small chip out of the corner) - $50

New wires - offer

Stock coil - offer

Red Fidanza Cam gears - $150

30/30 Boos gauge - $50

All brakes - $200

(1) 650cc Injector direct fit - 0ffer

MSD tach driver - $40

Cracked triple pillar pod - free if you buy something

Optima red top battery hold down - offer (missing 1 screw)

Turbo xs oil c.c new - $50

Bwoody oil c.c.(black pwder coat) - $40

Boost leak checker - $20

New oil drain plug - free if you buy something

SRT Oil & Volts gauges (just gauge) - offer

Thats what I can think of now... thats pretty much aftermarket but I will still have a lot of stock things if you need some random stuff. Brakes, radio, interior, doors, etc...

7579437983/PM