I just recieved my mopar bov from a seller on the forums and i was wondering if ya'll srt-4 guru's could help a young chap out. it didnt come with the bolts but it did come with some sort of gasket material? anyway. shoot me a pm. im here for the weekend. so we'll figure out a time 'cause i work..thanks.. beazies
I just recieved my mopar bov from a seller on the forums and i was wondering if ya'll srt-4 guru's could help a young chap out. it didnt come with the bolts but it did come with some sort of gasket material? anyway. shoot me a pm. im here for the weekend. so we'll figure out a time 'cause i work..thanks.. beazies
I can do it in 15 mins if you wanna come on down to bremerton I can do it for free.
i just wanna make sure that there's gonna be NO leaks when i install the thinggy..so that's why i need some EXPERT to install it for me..*cough COY..*cough*..Chris..*cough* John
Either way, it would probably be best to just wait and have someone who has done it before help you through it. Once you have done it you get the hang of how to get to the PIA bolt.
PLUS I cant believe how many threads recently have been posted about "My mopar BOV not making any noise and I'm a....Dee Dee Dee"
you wanna drive up to Bellingham and I'll throw it in for you
Either way, it would probably be best to just wait and have someone who has done it before help you through it. Once you have done it you get the hang of how to get to the PIA bolt.
PLUS I cant believe how many threads recently have been posted about "My mopar BOV not making any noise and I'm a....Dee Dee Dee"
you wanna drive up to Bellingham and I'll throw it in for you
OoO Wee..Bellingham..puhaha. I go to school up at the Dub..anyhow. Yeah, it didnt come with the gasket, but the seller was nice enough to send some type of gasket material though..and no bolts either.
might as well buy a new one unless you got a super good deal on half a part. get the specs on the bolts first then find some. a small sheet of gasket material is probably in order as well since you seem to have a mystery gasket on your hands.
anybody who has done it once can give you the necessary advice and help. its really easy and super duper hard at the same time. good luck.
Either way, it would probably be best to just wait and have someone who has done it before help you through it. Once you have done it you get the hang of how to get to the PIA bolt.
PLUS I cant believe how many threads recently have been posted about "My mopar BOV not making any noise and I'm a....Dee Dee Dee"
you wanna drive up to Bellingham and I'll throw it in for you
OoO Wee..Bellingham..puhaha. I go to school up at the Dub..anyhow. Yeah, it didnt come with the gasket, but the seller was nice enough to send some type of gasket material though..and no bolts either.
Go to S&P racing site on the vendors forum and post up for missing parts. Jimmy can get you the other parts your missing. Then PM sirmario23 and ask him how to surface the blue plate, you need to do these things prior to attempting an install.
Either way, it would probably be best to just wait and have someone who has done it before help you through it. Once you have done it you get the hang of how to get to the PIA bolt.
PLUS I cant believe how many threads recently have been posted about "My mopar BOV not making any noise and I'm a....Dee Dee Dee"
you wanna drive up to Bellingham and I'll throw it in for you
OoO Wee..Bellingham..puhaha. I go to school up at the Dub..anyhow. Yeah, it didnt come with the gasket, but the seller was nice enough to send some type of gasket material though..and no bolts either.
Go to S&P racing site on the vendors forum and post up for missing parts. Jimmy can get you the other parts your missing. Then PM sirmario23 and ask him how to surface the blue plate, you need to do these things prior to attempting an install.
damn..no one is try'n to help me out with this install? personally?
Either way, it would probably be best to just wait and have someone who has done it before help you through it. Once you have done it you get the hang of how to get to the PIA bolt.
PLUS I cant believe how many threads recently have been posted about "My mopar BOV not making any noise and I'm a....Dee Dee Dee"
you wanna drive up to Bellingham and I'll throw it in for you
OoO Wee..Bellingham..puhaha. I go to school up at the Dub..anyhow. Yeah, it didnt come with the gasket, but the seller was nice enough to send some type of gasket material though..and no bolts either.
Go to S&P racing site on the vendors forum and post up for missing parts. Jimmy can get you the other parts your missing. Then PM sirmario23 and ask him how to surface the blue plate, you need to do these things prior to attempting an install.
damn..no one is try'n to help me out with this install? personally?
Contact PTP John and ask him he's local for the parts your missing. I don't have any leftovers.
Either way, it would probably be best to just wait and have someone who has done it before help you through it. Once you have done it you get the hang of how to get to the PIA bolt.
PLUS I cant believe how many threads recently have been posted about "My mopar BOV not making any noise and I'm a....Dee Dee Dee"
you wanna drive up to Bellingham and I'll throw it in for you
OoO Wee..Bellingham..puhaha. I go to school up at the Dub..anyhow. Yeah, it didnt come with the gasket, but the seller was nice enough to send some type of gasket material though..and no bolts either.
Go to S&P racing site on the vendors forum and post up for missing parts. Jimmy can get you the other parts your missing. Then PM sirmario23 and ask him how to surface the blue plate, you need to do these things prior to attempting an install.
Hey thanks Frog! I got that installed on Sunday no prob. The hardest part was the typical 3rd bolt . At some point I just need to have a boost leak check done. She still pulls pretty hard but better safe than sorry. Sounds awesome!
Go to school at the Dub huh.....if you want we can hook up sometime and I will help out with the install.
Either way, it would probably be best to just wait and have someone who has done it before help you through it. Once you have done it you get the hang of how to get to the PIA bolt.
PLUS I cant believe how many threads recently have been posted about "My mopar BOV not making any noise and I'm a....Dee Dee Dee"
you wanna drive up to Bellingham and I'll throw it in for you
OoO Wee..Bellingham..puhaha. I go to school up at the Dub..anyhow. Yeah, it didnt come with the gasket, but the seller was nice enough to send some type of gasket material though..and no bolts either.
Go to S&P racing site on the vendors forum and post up for missing parts. Jimmy can get you the other parts your missing. Then PM sirmario23 and ask him how to surface the blue plate, you need to do these things prior to attempting an install.
Hey thanks Frog! I got that installed on Sunday no prob. The hardest part was the typical 3rd bolt . At some point I just need to have a boost leak check done. She still pulls pretty hard but better safe than sorry. Sounds awesome!
Go to school at the Dub huh.....if you want we can hook up sometime and I will help out with the install.
AutoForums.com is the premier network of enthusiast-owned
enthusiast-operated automotive communities.
We operate more than 100 automotive forums where our users consult peers for shopping information and advice, and share
experiences and opinions as a community.
Neal Needs help installing his new BOV :D
. At some point I just need to have a boost leak check done. She still pulls pretty hard but better safe than sorry. Sounds awesome
!
Linear Mode
