You might also add FAST Specialties in Vancouver, WA. Nice people! They've worked with several SRT-4s and GT Turbos from simple dyno runs to full transformations from stock to big turbo setups. These guys cost...but are VERY professional. They also let you bring in your own parts for them to install. They specialize in Cobras and lightnings...so they know boost.
RRev Motorsports offers $65 baselines with air/fuel reading.
$100/hr dyno rental, $150/hr for tuning
We also offer specials for club events, PM me if interested.
zane and others: can you recommend any of the businesses listed above to tune a map clamp and possibly water injection. my map clamp came today and i intend on going water injection soon. i have no beef with going to intec because 1) its close and 2) my dynos will be accurately related to my previous dynos there. as in, all dynos give variable readings. if i go there my performance will be most accurately compared to the same dyno ive already used.
thanks.
j.r.
Intec racing in Kent,WA is the worst shop ever.They do dyno even with AC on. And they are scared to put more then 10psi of boost. They show me 250hp at 10psi.
zane and others: can you recommend any of the businesses listed above to tune a map clamp and possibly water injection. my map clamp came today and i intend on going water injection soon. i have no beef with going to intec because 1) its close and 2) my dynos will be accurately related to my previous dynos there. as in, all dynos give variable readings. if i go there my performance will be most accurately compared to the same dyno ive already used.
thanks.
j.r.
Intec racing in Kent,WA is the worst shop ever.They do dyno even with AC on. And they are scared to put more then 10psi of boost. They show me 250hp at 10psi.
Well I dont know who ran your dyno, they are very knowledgable. I do have a question of how they dynoed you at 10psi I mean thats below stock psi. If you feel wronged and would like to re-dyno I would be happy to talk with the owner and get you in there again.
Intec racing in Kent,WA is the worst shop ever.They do dyno even with AC on. And they are scared to put more then 10psi of boost. They show me 250hp at 10psi.
Yeah, I'm kind of questioning this one too. I've seen some of the cars they tune, and they seem to be tuned quite well. I also dynoed down there and thought they were professional and did a good job.
Intec racing in Kent,WA is the worst shop ever.They do dyno even with AC on. And they are scared to put more then 10psi of boost. They show me 250hp at 10psi.
Yeah, I'm kind of questioning this one too. I've seen some of the cars they tune, and they seem to be tuned quite well. I also dynoed down there and thought they were professional and did a good job.
I dyno at Axiom and they show me 300hp and 330ft at 22psi and i have agp t3t4 turbo and mapar stage2.When i dyno the black air from the muffler started to pop. It should be more then 300hp may be i have a stock fuel pump,and it doesn't pump after 300hp and the injectors are stage2.The air/fel ratio is 14 and i need more fuel.
Intec racing in Kent,WA is the worst shop ever.They do dyno even with AC on. And they are scared to put more then 10psi of boost. They show me 250hp at 10psi.
Yeah, I'm kind of questioning this one too. I've seen some of the cars they tune, and they seem to be tuned quite well. I also dynoed down there and thought they were professional and did a good job.
I dyno at Axiom and they show me 300hp and 330ft at 22psi and i have agp t3t4 turbo and mapar stage2.When i dyno the black air from the muffler started to pop. It should be more then 300hp may be i have a stock fuel pump,and it doesn't pump after 300hp and the injectors are stage2.The air/fel ratio is 14 and i need more fuel.
You are pushing 22psi on a stage 2 fuel set up with nothing else fuel wise added with a T3/T4 turbo and your AF are in the 14's?
Make sure you film everything. Its going to get exciting.
__________________
Located in Kitsap County, I am the Northwest's premier sport, luxury, and import tuning facility.
Apparently that is all you have to do to make that claim.
Word of advice.... Just stop now before it gets worse... Let it all wash away... This post backs up your post count. You might be able to bench 300lbs, but this internet is Serious Business and you are not ready....
AutoForums.com is the premier network of enthusiast-owned
enthusiast-operated automotive communities.
We operate more than 100 automotive forums where our users consult peers for shopping information and advice, and share
experiences and opinions as a community.
: Everything said on the forums is 80% truth at BEST
intecracing sucks
Linear Mode
