it seperated right where the tube meets the connector.
Hey Ryan , I hate to brake it to you but if the line you used is the one that you circled than that was th wrong line . The line that was supposed to be used for the oil feed is the one with the wrighting on it it should say something like " high pressure line or injection hose " . Glad your ok and your car was not damged to much though . I'll get a new hose out to you first thing in the morn. pm me with your address again
That is the one that John said to use. he pointed it out and said this is the oil line and the other ones were the water lines. I went by what he said..... i will pm you the address.
tony is the man. i always say. you can tell how good a business is, by how they treat you when something goes to hell.
I am pretty sure my turbos bearing crapped out. and i talked to tony and he is going to cover everything for me completely. i know most of you would say, well that is to be expected. well i am sorry but alot of companies i have come into contact with pretty much kick you to the curb. Thank you tony and I will be doing business again with you after this.
tony i will have the turbo off the car this week and i will find a way to meet you half way or something along those lines. (see if i have any friends heading up there) i will also try to get my head and everything else off my other motor to see if we can do everything at once, but i am sure its only going to be the turbo. the head on the other motor is a pretty big project.
that is a good idea. how much was the fire extinguisher?
I have what I think is a similar one and it was 15 bucks at walmart and the mounting bracket went nicely on to my rollbar...At least it gives you a small shot of something if a oil fire does break out....Glad things are going to work out for you
__________________
Fastest SRT4 in Canada for 2007 @ 128.77
Quickest SRT4 in Canada for 2007 @ 11.286
Trying to be one of the first Canadians into the 10's
extinguisher was like $12 at HD I fabbed up this bracket it didn't come with the extinguisher. I got bored this sunday and made it. I still need to paint it black. Has an end stop and nice round rings, turned out pretty good. Nice and clean in the car.
It is only 3" in diameter just looks bigger in the pic
Thats how much I paid for my extiguisher was $20 bucks, and its the fire extiguisher thats made to put out oil or fuel based fires as ricey as it may look, everyone needs it
__________________
project s20g w/49lb wheel over 400hp on pump 11's this year or BUST
Shop address:
980 N. State St. Suite D-5
Hemet, CA 92545
Thats how much I paid for my extiguisher was $20 bucks, and its the fire extiguisher thats made to put out oil or fuel based fires as ricey as it may look, everyone needs it
I agree....I wonder if I can get them in blue? I dont want to mount it on the doors like some people do...to me thats gay, but easy access though. I would rather have mine mounted on the ground like in the picture above.
TRUNGE
over 400hp on pump 
11's this year or BUST
I dont want to mount it on the doors like some people do...to me thats gay, but easy access though. I would rather have mine mounted on the ground like in the picture above.
Linear Mode
