We have been non-stop making parts for the last month now and i figured we go through a few things with you guys to show whats going on. Obviously first off we've been working on these traction bars. Here's a few pics of what there looking like:
Next on the list is the new budget catch cans. These will be for the people looking for a cheaper alternative to an awesome catch can. We have a batch of 20 at the powdercoater right now:
A shot of the first batch of overflows that are also at the powdercoater. Were building another 10 units right now as well:
Here's about 30 heat shields, half of them went to our powdercoater:
A bin full of motor and transmission mounts. Most of these are at the powdercoater as well:
And our usuall oil catch cans are being built right now, we'll probably do this batch of 30 in the next few weeks:
And one more thing we wanted to build was a bloclock off plate. I have been asked by many people if we carry them. Well here is what we wanted to do. Since alot of people offer block off plates, we wanted to offer it like noone else does. So we built this one out of 1/2" thick aluminum. Since most people lose there bolts from the stock surge valve when replacing it to a riceplate, this will be made to utilize those riceplate bolts. Another thing is these are so thick, you will never have a problem with it warping or bending after removal. We are thinking about adding on a tab so it's easier to remove as well. Let me know what you guys think:
Just thought i'd share with you guys a little bit of whats going on behind the scenes.
-Garrett
Been busy at the shop......
Linear Mode
