HID Retrofit Group Buy! Distributed by ByVampDesign - Page 5 - SRT Forums

BoostJunkies · 09-23-2007, 02:40 PM

Quote: Originally Posted by Canuck_2k

can you show us the back of the headlight? it's nice what you did on the headlight, but i wanna see how it looks at the back of the headlight (cutting, etc etc..)

also, my car is a 2001 RT, but w/ an 04 SRT4 swap. I've always wanted a retrofit nobody seems to care nor want to help me out.

That will be no problem after I get done with this project, I will be surely glad enough to take a picture of the back of the headlight.

VampOfVegas · 09-24-2007, 08:09 AM

We have these kits ready to be made. There is no major wait time. 2-3 weeks tops!

Jerod · 09-24-2007, 11:23 AM

Is it even possible to order a projector that just takes the H1 bulbs?

**haknslash** · 09-24-2007, 03:44 PM

Quote: Originally Posted by Phillips8201

Once again, what is the benefit of this?

http://www.hidplanet.com/forums/view...=35629&start=0

Quote: Originally Posted by BoostJunkies

Quote: Originally Posted by redhotneon

whats the differecne between tsx and tl projectors? im a newb.

tsx offering a low beam
tl offering hi and low beam

There is A LOT more to it than that.

TL on the left and TSX on the right

BoostJunkies · 09-24-2007, 03:48 PM

Quote: Originally Posted by haknslash

Quote: Originally Posted by Phillips8201

Once again, what is the benefit of this?

http://www.hidplanet.com/forums/view...=35629&start=0

Quote: Originally Posted by BoostJunkies

Quote: Originally Posted by redhotneon

whats the differecne between tsx and tl projectors? im a newb.

tsx offering a low beam
tl offering hi and low beam

There is A LOT more to it than that.

TL on the left and TSX on the right

Yes there is more than that, TSX and TL projectors are alot different from each other.

Phillips8201 · 09-24-2007, 05:09 PM

Thanks Hak for the info! I knew there was a reason they are more expensive and popular.

As for BoostJunkies..... Do you have any pics of your retrofits lighted up showing your cutoffs? Do you align these before they ship out and what are your tolerances? I guess I'm weary as you don't show many pics of your retrofits lighted up, which is where it all matters. Hak always showed pics and knew everthing about what he was doing and could explain it. Could you tell us what are the major differences of the TSX and TL?

BoostJunkies · 09-24-2007, 09:57 PM

tsx vs tl
Diameter of projector facing 2.5" vs 3"
low beam vs high and low beams
different beam patterns

Here is some pictures from hidplanet, tsx projector
vs
TL projector
which is in the above picture in haks post.

I'll try to get some picture of my own soon, my car is still in the shop waiting for it to come out so I can get some pictures of HID kits, and my retrofitting cutoffs etc.

Phillips8201 · 09-25-2007, 01:19 AM

Quote: Originally Posted by BoostJunkies

tsx vs tl
Diameter of projector facing 2.5" vs 3"
low beam vs high and low beams
different beam patterns

Here is some pictures from hidplanet, tsx projector
vs
TL projector
which is in the above picture in haks post.

I'll try to get some picture of my own soon, my car is still in the shop waiting for it to come out so I can get some pictures of HID kits, and my retrofitting cutoffs etc.

Who's car are you aligning the retro's you are taking orders on if your car is in the shop?
EDITED

BoostJunkies · 09-25-2007, 07:36 AM

Quote: Originally Posted by Phillips8201

Quote: Originally Posted by BoostJunkies

tsx vs tl
Diameter of projector facing 2.5" vs 3"
low beam vs high and low beams
different beam patterns

Here is some pictures from hidplanet, tsx projector
vs
TL projector
which is in the above picture in haks post.

I'll try to get some picture of my own soon, my car is still in the shop waiting for it to come out so I can get some pictures of HID kits, and my retrofitting cutoffs etc.

Who's car are you aligning these on if your car is in the shop?

VampOfVegas · 09-25-2007, 08:34 AM

Well since its takes 2-3 weeks for these kits to be made, pretty sure his car will be out of the shop by then. Also he has a neighbor w/ a car he can use.

BoostJunkies · 09-25-2007, 09:31 AM

Quote: Originally Posted by VampOfVegas

Well since its takes 2-3 weeks for these kits to be made, pretty sure his car will be out of the shop by then. Also he has a neighbor w/ a car he can use.

The beast is in the shop.

srt4drag0n · 09-25-2007, 11:14 AM

Add Me To The List, E55 Retro

BoostJunkies · 09-25-2007, 12:02 PM

Quote: Originally Posted by srt4drag0n

Add Me To The List, E55 Retro

send money to vamp, with detailed description of what you want, I can get a hold of a e55 projector.

Phillips8201 · 09-25-2007, 03:57 PM

Quote: Originally Posted by VampOfVegas

Well since its takes 2-3 weeks for these kits to be made, pretty sure his car will be out of the shop by then. Also he has a neighbor w/ a car he can use.

I suppose, I guess his car wouldn't be in there real long. It's nice to have a neighbor who has the same kind of car and gets into modding also!

Sorry to ask again, but there was no answer to this as it may have got looked over,
Do you align these before they ship out and what are your tolerances for the projectors alignment in the housing?

BoostJunkies · 09-25-2007, 04:06 PM

Quote: Originally Posted by Phillips8201

Quote: Originally Posted by VampOfVegas

Well since its takes 2-3 weeks for these kits to be made, pretty sure his car will be out of the shop by then. Also he has a neighbor w/ a car he can use.

I suppose, I guess his car wouldn't be in there real long. It's nice to have a neighbor who has the same kind of car and gets into modding also!

Sorry to ask again, but there was no answer to this as it may have got looked over,
Do you align these before they ship out and what are your tolerances for the projectors alignment in the housing?

Dont worry about it, you should know things before you buy them. Anyways, I do align them before I ship them out, and use a leveler and a bunch of things to make it sit right in the housing a little tweaking here and there etc..