**SPECIAL** -SRT4 RACE Valves : +1 INT +2 EX - SRT Forums

CNCPORT.COM · 10-28-2009, 10:20 AM

These are not for the weak at heart!

We are running a Special till the end of 2009 on the RACE Valves.
8 Pieces +1mm Intake
8 Pieces +2mm Exhaust

NOTE: These valves only take a "single groove" valve lock. They will not work with your OEM stock valve locks. BC also sells a special Retainer for use with these valves.

3 Different Packages

Package A:
16 RACE Valves (+1/+2) Only

Package B:
16 RACE Valves (+1/+2)
1 set of Valve Locks "single groove"
1 set of OEM Valve Seals

Package C:
16 RACE Valves (+1/+2)
1 set of Valve Locks "single groove"
1 set of OEM Valve Seals
1 set of BC "Special" Retainers and Valve Springs
1 set of shims to shim Valve Springs to Proper Pressure

PM me with what Package you want quoted and Your Zip Code

We can not post the prices due to the discounted pricing!

Race Valves (+1/+2)

OEM Valve Seals

Stock VS. Single Groove Valve Locks

Shims

Package C

CNCPORT.COM · 11-03-2009, 01:50 PM

1st Valvetrain Kit Shipped Today!

CNCPORT.COM · 11-10-2009, 04:20 PM

PM'd a Package C price

reed32 · 11-10-2009, 04:28 PM

bump for a great seller

BoostingSnail · 11-11-2009, 12:03 PM

can the stock valve seats be cut/ground to accept the +2mm exh. valve, or do you need new oversize seats in the head?

thanks,
tyler

CNCPORT.COM · 11-11-2009, 12:06 PM

What's your horsepower goal? How much boost?

wonderboy · 11-11-2009, 12:17 PM

How would the exhaust valves hold up to the heat of a turbo car?

Are all the valves made out of stainless steel?

I think the stock exhaust valves are sodium filled.

CNCPORT.COM · 11-11-2009, 12:17 PM

Yes the stock seat can be machined to accommodate the +2mm Valve.

Is this the best thing to do in all applications, probably not.

CNCPORT.COM · 11-11-2009, 12:26 PM

Quote: Originally Posted by wonderboy

How would the exhaust valves hold up to the heat of a turbo car?

Are all the valves made out of stainless steel?

I think the stock exhaust valves are sodium filled.

We have run this same exact alloy in 1000+ hp turbo motors, with no integrity issues.
Yes these are a Stainless Alloy.
The stock valves are not sodium filled.

CNCPORT.COM · 11-16-2009, 03:22 PM

PMs sent

reed32 · 11-20-2009, 07:15 PM

+1 for a good vendor...... Thanks for sending the valvetrain so fast and giving me helpful information

im almost finished with our race head

matthew00029 · 11-21-2009, 10:43 PM

Reed who did the port work? Is the intake ports gasket matched? What IM are you using on that head?