Have a Used Cylinder Core? - SRT Forums

CNCPORT.COM · 05-22-2008, 06:49 AM

We may be interested in purchasing your Used Cylinder Head.
These heads need to be unmolested, never over heated, un warped, and never blown up. AKA In good working order.

They must have the correct cam caps

We will only accept cylinder heads that have the Cam Caps numbered from the Factory. There are too many horror stories about guys losing

or switching caps around.

Nasty_NAS · 05-22-2008, 10:46 PM

Quote: Originally Posted by CNCPORT.COM

We may be interested in purchasing your Used Cylinder Head.
These heads need to be unmolested, never over heated, un warped, and never blown up. AKA In good working order.

They must have the correct cam caps

We will only accept cylinder heads that have the Cam Caps numbered from the Factory. There are too many horror stories about guys losing

or switching caps around.

what are you all paying for them?

scottw03 · 05-22-2008, 10:55 PM

Dodge Neon SRT-4 Time to Wake up the Dodge! 5-Axis CNC Porting, CNC Chamber, Bronze Guides, SERDI Valve Job. Port Designed for Intake (36mm)+1mm, Exhaust (30.5MM)+2mm. BC Valvetrain Available. New OEM Casting Available. Flow Numbers Available.

I see the port work you do increases the size of the valves for intake and exhaust right?

Do you guys install the new valves as well so that when we receive it back we can bolt it right up to the car? Just wondering. I would like to get this done later, after I get back to the states later this year. I would like to start building the engine after I am able to get another DD to use while doing that.

Thank you.

SRT-4_UK · 05-23-2008, 10:08 AM

It was installed when i bought mine. Check the group buy thread for pictures.

CNCPORT.COM · 06-03-2008, 04:57 PM

Sorry about the late reply. I was out of town for a few days.
We usually sell the heads complete, so all the customer has to do is bolt it on, add rockers, lifters, and cams and bingo

SRT-4_UK · 06-03-2008, 08:02 PM

dont forget gears.

CNCPORT.COM · 06-27-2008, 08:16 AM

We have been receiving alot of Inquires on how much we pay for cores.
You have to remember there is alot of liability involved with us selling a used core. So we don't get scammed on buying some junked core, we don't offer alot of money for used heads. Because of the Low Cost of a Brand New Head, we don't promote the reselling of used heads. After all, alot of guys beat the tar out of these motors & often overheat them just before they rebuild them.

We haven't yet to date offered over $150 for a Used Core. And yes we don't have a Core Charge, we either rework the customers head or just sell them a new one.

Everyone keeps acting surprised by our lack of interest for paying more, there are/where other vendors on here offering $100. Yes I too offer $100 to alot of the PMs we have gotten. But we always offer to pay for the Shipping Charges too.