plz help again part 2 - SRT Forums

yellow srt4 · 05-19-2008, 07:48 PM

--------------------------------------------------------------------------------

ok everything is fixed execpt everytime i get on it black smoke shoots out an it wont stop sputtering, my aem boost guage boost controller says 26.7 psi but my settings option a is 10 psi aption b is 10 psi. i have a agp wasgtegate hooked up, its turned all the way up i think i need to adjust, need some help thnx....

silverbullitsrt · 05-20-2008, 07:40 AM

sounds like your runnin rich do you have wideband along with something to adjust your AFR's i.e SAFC2 or mapclamp

yellow srt4 · 05-20-2008, 05:21 PM

not yet i have a aem ugo wide band an a aem tru boost

wideband idle=14.7 wot=10.00

98srt2dr. · 05-20-2008, 05:25 PM

10.0 is way way rich, thats the richest the wideband will read

yellow srt4 · 05-20-2008, 06:59 PM

im going to set the boost back to stock an see how it goes from there i might even put a stock waste gate back on

98srt2dr. · 05-20-2008, 07:20 PM

turning the boost down probably wont help the richness, u need a way to pull fuel

yellow srt4 · 05-21-2008, 06:04 AM

what do u think i need i just talked to this dude an he said that he will sell me his safc 2 for 150

Paper · 05-21-2008, 09:05 AM

SAFC2 will allow you to make some fuel adjustments. You need the msd tach driver too.

98srt2dr. · 05-21-2008, 10:16 AM

tach driver and a safc will help

yellow srt4 · 05-21-2008, 06:25 PM

i have a tach driver mounted to the car about a yr now just never bought a safc 2, the wasgate is turned down now, i mean turned down that the nut isnt tight any more cant work on my car that much cuz im working so much but when i get a chance i will get to the bootom of the problems

gump1114 · 05-23-2008, 05:40 AM

a mod list would probably help us diagnose the problem a little better. stock injectors? stock turbo (unmodified)?

yellow srt4 · 05-24-2008, 11:48 AM

ok mods

i have ported an polished head
titanium valve springs an retainers
dcr stock ported an polished intake manifold
dcr throttle body
motor mounts
tranny mount
big front mount
trunetics hard pipes
greddy rs bov
perrin block off plate
maddog sts
s1 clutch
s1 injectors
s0 ecu (looking for s1 btw)
eibach kit
agp wastegate
msd wires
aem tru boost
aem wide band

more but cant think rite now.....