NC/SC/VA Welders - SRT Forums

bene · 01-13-2008, 10:28 PM

i bought a needswings V5 and cant find any exhaust shops that will work on a car without a cat.

what i need done is the 3" to 2.25" reduction part cut off and a extension with a flange for a 3" exhaust welded on.

If anybody can do this or knows a shop/someone that can do this i will be happy to pay enough to make it well worth your time.

thaprofessor33 · 01-13-2008, 11:06 PM

Where in NC are you located? i know of a few places around my area that could do it

bene · 01-14-2008, 05:27 AM

up in greensboro, im willing to drive to concord.

crackaddict · 01-14-2008, 10:29 AM

there's a shop here in fayetteville that did mine... he said it was tuff as balls to cut, but he managed to get through it, and install my side exit for like $120.

bene · 01-14-2008, 11:05 AM

do you know the name of the shop?

crackaddict · 01-14-2008, 09:07 PM

it was Ken's Muffler

stageII · 01-16-2008, 01:24 PM

hey man there is alot of places here that will do the job for you in fayetteville and if that is all they have to do is put up the down pipe i would say no more then 50 bucks to be honest. I have a question for you Y did you go with the cut out you do know it will take power from the car on top end.

bene · 01-16-2008, 08:46 PM

well i hope to gain some tq and get a lil faster spool up to 22 psi but mostly i just like the sound of it. and if i wanna go back to B&B all i gotta do is put on the block off plate.