Jonathan Hedrick
Lexington,NC gt2racr@hotmail.com but best way to contact me is through PMs.
Paypal only
psi-fi manifold, o2 housing, dumptube-$400 shipped, if local we'll talk about the price without shipping. Price lowered to $300 shipped. Lowest I can go.
I changed my setup this weekend so I'm getting rid of a few things. What I have is a psi-fi manifold and o2 housing, and a custom dumptube. The psi-fi setup was originally meant to recirculate but I didnt like that so I cut the flange off the o2 housing and welded that up and made a dumptube for the wastegate. The manifold is for a t3 flanged turbo and a 35/38mm wastegate. I had to "massage" the dumptube to make it fit around the o2 housing and its trimmed short enough that it won't hit the frame and cause false knock. I also heatwrapped it just incase it were to touch the o2 housing, so it wouldnt vibrate and cause any false knock. The o2 housing was originally for a 5 bolt turbo but I changed turbos half way into owning this kit so I changed the flange from a 5 bolt to a 4 bolt so this should appeal to alot more people now since 5 bolts aren't near as common. On 21psi with a 61mm turbo, before I had the sct, 6-7 counts of knock ( due to no sct yet), afrs in the high 10's, car went 97.2mph in the 1/8th with these parts. Pretty sure everything was ceramic coated when I got it but I sprayed some black vht2000 over it all when I installed it. Overall everythings in good shape and worked fine for me, I just got a good deal on a different setup. Thanks for looking!
__________________
Looking for rc1000s-1200s and a fullblown twin pump setup, PM me if you have either.
SCT tuned by AGP!
Last edited by turbojonsrt4 : 06-19-2008 at 05:10 PM.
lol bump, come on I know someone wants to piece a kit together! It will beat the hell out of dropping $1500ish at once and allow you to get the turbo you want instead of settling for what a certain company offers.
Yes the o2 housing fits up to a regular downpipe. Its a psi-fi kit, I just did away with the recirculating wg pipe and replaced it with a dumptube instead, and changed the 5 bolt o2 housing flange to a 4 bolt. This should fit a dbb 50 trim as long as the 4 bolt flange on a 50 trim is the same size as the 4 bolt flange is on my sc61.
AutoForums.com is the premier network of enthusiast-owned
enthusiast-operated automotive communities.
We operate more than 100 automotive forums where our users consult peers for shopping information and advice, and share
experiences and opinions as a community.
Big turbo parts for sale in NC
for a good guy
...
...
Linear Mode
