Daytona Beach Dyno Day Srt-4/mopar - SRT Forums

Turbo_SRT_05 · 08-14-2008, 03:53 PM

My name is Matt and i work for Raabe Racing in Daytona Beach. We are having a mopar/srt dyno day at our shop on Sat. Sept. 13th at 9am.

We are located at 1870 mason avenue, daytona beach, fl, 32117. For anyone who needs directions use mapquest or call.

We are really excited about the day and all the activities in it. We will have a dyno competition along with a band and crazy discounts on all sales in the parts room.

Example: Slowboy racing manifold, GT35R turbo, turbosamrt or tial wastegate and o2 housing for SRT-4 is 1900.00. We also are selling fuel return lines for 280.00 brand new complete kits with aeromotive fpr's.

We would like to have a good turnout. We have a facility that can cater to your every need. Full machine shop, parts room, frame off restorations, you name it we can build it. We also do custom setups for race cars in grand am and scca.

Dyno will be 50 dollars for 2 pulls w/ a/f. we will be running all day long so please get here early because we will cap it off at 2 oclock. thats when the list stops.

Hope to see everyone out there. Parts room number is 3862747611 and my cell is 3868827953 for any and all questions.

Turbo_SRT_05 · 08-14-2008, 03:57 PM

please post if you are comin so i can have an accurate count

04bluesmithjuice · 08-14-2008, 04:42 PM

Scweet, I will be moving down there the week prior, so I might just show up. No dyno though...stock clutch...no thrid gear...and 50 trim don't go together all that well...

Turbo_SRT_05 · 08-15-2008, 08:24 AM

cool hope to see you there. if anything come check out our prices on mikronite for your tranny when u get your new 3rd gear. let me know.

Turbo_SRT_05 · 08-15-2008, 03:39 PM

PLEASE READ> DYNO DAY HAS CHANGED TO SUNDAY THE 14TH> THE REASON FOR THE CHANGE IS THAT WE HAVE A COBRA DYNO DAY THAT THE OWNER SET UP ON THE 13TH SO WE NEED TO CHANGE IT TO THE 14TH> THANKS FOR UNDERSTANDING

407srt4 · 08-17-2008, 11:40 PM

im there bro

04bluesmithjuice · 08-18-2008, 10:17 AM

I might have to throw it on the dyno now that the 3rd gear problem is fixed....

Turbo_SRT_05 · 08-19-2008, 08:23 AM

what did you do to fix the problem?

04bluesmithjuice · 08-19-2008, 10:18 AM

Replaced 3rd gear, syncro, bearing and shift fork. Another local guy had the same problem with his except he actually broke his shift fork....he replaced all those I listed and some washers and what not and his is back up in brand new form...

Getting it done this friday, then when I get down there I will need to get a base street tune (for elevation change) and hopefully I will be able to make it on sunday.

Turbo_SRT_05 · 08-20-2008, 07:48 AM

i hope we can get your car all squared away and i really hope that you come to the dyno day

04bluesmithjuice · 08-20-2008, 03:11 PM

Do you guys do alignments for coilovers and camber plates?

Ill just need a base line tune, I will zero out all my settings and start from scratch. I have 650's right now and dtec FCBC to tune, just need to get a good pump gas tune when I get down there....

Turbo_SRT_05 · 08-20-2008, 09:24 PM

we can do alignments for coilovers and camber plates. whatever you got BRING IT. coilovers and camber plates are done by the hour and we can balance your vehicle on the race platforms to balance it perfectly. let me know homie

04bluesmithjuice · 08-22-2008, 11:17 AM

What do you usually get for alignments on coilovers and plates? Just a ballpark. Just so I know when I can install them or if I have to wait a few weeks to save some money.

Turbo_SRT_05 · 09-03-2008, 07:47 AM

alignments themselves are 69.99 and with a coilover set-up it is 80/hr.

04bluesmithjuice · 09-05-2008, 05:10 PM

Cool, I will be there on sunday wether I dyno or not, not sure how the funds are with a big move ahead of us.