good 50 trim

[benmcc2003]

so i have a good 50trim map, cost me over 500.00 bucks to get. many hours on the dyno. But i am going to post it and hope to get some changes and updates figure this is a good start and we can get a great map going.

here are my mods

built motor
DBB 50
return line
RC 750's
AEM boost solonid
AEM 5 bar map

the base is at 20lbs so most should be set.

[distinctdev]

Quote: Originally Posted by benmcc2003

so i have a good 50trim map, cost me over 500.00 bucks to get. many hours on the dyno. But i am going to post it and hope to get some changes and updates figure this is a good start and we can get a great map going.

here are my mods

built motor
DBB 50
return line
RC 750's
AEM boost solonid
AEM 5 bar map

the base is at 20lbs so most should be set.

i would be careful with this map, looks like an overboost could cause some problems. The timing gets higher as boost goes over 20, also autotune is set for 12.5 under all boost conditions

[benmcc2003]

Quote: Originally Posted by distinctdev

Quote: Originally Posted by benmcc2003

so i have a good 50trim map, cost me over 500.00 bucks to get. many hours on the dyno. But i am going to post it and hope to get some changes and updates figure this is a good start and we can get a great map going.

here are my mods

built motor
DBB 50
return line
RC 750's
AEM boost solonid
AEM 5 bar map

the base is at 20lbs so most should be set.

i would be careful with this map, looks like an overboost could cause some problems. The timing gets higher as boost goes over 20, also autotune is set for 12.5 under all boost conditions

thanks for the heads up, i have not driven the car in boost yet. i picked it up, put it in teh garage and jumped a plane for Cabo San Lucas.

[benmcc2003]

[quote=benmcc2003][quote=distinctdev]

Quote: Originally Posted by benmcc2003

so i have a good 50trim map, cost me over 500.00 bucks to get. many hours on the dyno. But i am going to post it and hope to get some changes and updates figure this is a good start and we can get a great map going.

here are my mods

built motor
DBB 50
return line
RC 750's
AEM boost solonid
AEM 5 bar map

the base is at 20lbs so most should be set.

also thought this was a decent place to start making a good map, hoping everybody that might have some ideas, make them and post. We can make a nice base big turbo map. I know allot of the other forums do much the same.