Go Back   SRT Forums - SRT4, SRT6, SRT8, SRT10 & Dodge Forum > Other SRT/PVO Vehicles > Other SRT/PVO Vehicles > Chrysler PT GT/Turbo
Register Home ForumForum Rules Photo Gallery Active Topics (D) Chat Mark Forums Read


SRTForums.com is the premier Dodge Neon SRT-4 on the internet. Registered Users do not see the above ads. Please Register - It's Free!


Reply
 
LinkBack Thread Tools Display Modes
Old 11-23-2006, 02:04 PM   #1 (permalink)
SRTforums Member
 
Join Date: Jul 2006
Member Number: 44109
Location: MI
Trader Rating: (13)
Posts: 97
Default Stumbling problem on acceleration

I am trying to help my uncle out. He has an 03 or 04 pt cruiser gt. He installed a K&N open filter, a Jet stage 2 chip and had a magnaflow muffler installed. He also installed some Champion spark plugs( Due to availability where and when he was buying plugs).

All of this was installed in June-July of this year and it ran great with no problems until 2 weeks ago or so. During easy acceleration it runs smooth and normal but when he jumps on it, He says it pops and sputters and eventually cleans out and goes but runs rough until he is less than half throttle or so.

He did a quick look over the engine bay and didnt see anything out of the ordinary but he did pull the plugs and said they were dark.

Any ideas? Im thinking either the plugs are junk or there is a boost leak but I wanted to check with any other pt owners to see what they think.

He also uninstalled the jet chip but he said it got worse so he put it back in.
kingpin3 is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 11-23-2006, 04:02 PM   #2 (permalink)
SRTforums Member
 
srt_jesse's Avatar
 
Join Date: Aug 2006
Member Number: 45408
Location: arizona
Trader Rating: (2)
Posts: 197
Default pt problems

Quote: Originally Posted by kingpin3
I am trying to help my uncle out. He has an 03 or 04 pt cruiser gt. He installed a K&N open filter, a Jet stage 2 chip and had a magnaflow muffler installed. He also installed some Champion spark plugs( Due to availability where and when he was buying plugs).

All of this was installed in June-July of this year and it ran great with no problems until 2 weeks ago or so. During easy acceleration it runs smooth and normal but when he jumps on it, He says it pops and sputters and eventually cleans out and goes but runs rough until he is less than half throttle or so.

He did a quick look over the engine bay and didnt see anything out of the ordinary but he did pull the plugs and said they were dark.

Any ideas? Im thinking either the plugs are junk or there is a boost leak but I wanted to check with any other pt owners to see what they think.

He also uninstalled the jet chip but he said it got worse so he put it back in.

tell your uncle to change his plugs and whires to fill up the tank and put a full fuel system clean up additive and the car should run better than ever
srt_jesse is offline   Reply With Quote
Old 11-23-2006, 07:03 PM   #3 (permalink)
SRTforums Member
 
Join Date: Jan 2005
Member Number: 23071
Location: wi
Trader Rating: (0)
Posts: 341
Default

the stock wires are junk. get new wires and plugs.
__________________
s1, stock turbo, power paq, needswings dp, custom intake, custom cold side pipes, agp wga, ngk plugs, magnacore wires, direct port 100 shot, aem wb a/f of 11.5-11.8, custom intake mani, direct port water injection, 255 pump, second fuel system for nitrous with return line and fpr, 12.3@116 2005 pt cruiser
brngrhd is offline   Reply With Quote
Old 11-23-2006, 10:27 PM   #4 (permalink)
SRTforums Member
 
Join Date: Jul 2006
Member Number: 44109
Location: MI
Trader Rating: (13)
Posts: 97
Default

I have passed the info along. Thank you and we will see how it works out.
kingpin3 is offline   Reply With Quote
Old 11-24-2006, 04:57 PM   #5 (permalink)
SRTforums Member
 
Join Date: Jan 2004
Member Number: 7260
Location: Calgary
Trader Rating: (0)
Posts: 21
Default

I would ditch the Jet Chip and get a Stage 1 PCM. Many of the PT guys use iridium plugs which seem to work quite well.
__________________

2005 GT Vert, ATX, Stage 1, MaxxFab 3" O2 Housing and DP, Custom Dynomax Ultraflow Exhaust System, Plastic Manafold, AGP WGA, AMX1397TTAB w/Apollo CAI, AGP UCP w/Greddy RS BOV, TurboXS MBC, Mopar BOP, Autometer Boost Guage, MSD Wires, NGK Iridiums gapped at .028, Turbo Timer, Upper and Lower Prothane Motor Mount Inserts, DCR Oil Flow Modifier, BTG Strut Tower Brace, Transman Modified Tranny.
drakos is offline   Reply With Quote
Old 11-24-2006, 05:30 PM   #6 (permalink)
SRTforums Member
 
r.j-lo's Avatar
 
Join Date: Oct 2003
Member Number: 4599
Location: Albuq, NM
Trader Rating: (22)
Posts: 2,145
Default

werd on the plugs/wires
r.j-lo is offline   Reply With Quote
Sponsored Links
Advertisement
 
Reply

Register Home Forum Photo Gallery Active Topics (D) Chat Mark Forums Read
  SRT Forums - SRT4, SRT6, SRT8, SRT10 & Dodge Forum > Other SRT/PVO Vehicles > Other SRT/PVO Vehicles > Chrysler PT GT/Turbo




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

» Wheel & Tire Center

Sponsors

Powered by vBadvanced CMPS v3.0 RC2

All times are GMT -6. The time now is 07:54 AM.

(C) SRTforums.com
Page generated in 0.13980 seconds with 13 queries

Search Engine Optimization by vBSEO 3.1.0