Using scanguage with aem ems... - SRT Forums

Dasstrum · 09-11-2009, 10:02 AM

Alright, after doing some research, I could find nothing on this question. I am wanting to know if it is possible to use the Scanguage while having a AEM EMS installed. From what I have learned is that the way the gauge reads all the parameters is by plugging into the OBD port. Is it possible with a AEM EMS installed?

Also, the only reason for me wanting to get this gauge is that it can read AFR and Boost in 1 gauge. In order for me to read those 2 parameters would I have to get the "boost gauge adapter" AND the "AFR o2 sensor adapter" in order to read those or will my AEM EMS take care of that. (Its a UEGO AEM)

Thanks in advance! Hope to be buying one as soon as these questions get answered.

nutz · 09-15-2009, 12:47 AM

NO, this is the second thread about this you would need the AEM serial gauge

Dasstrum · 09-15-2009, 01:08 PM

That was the 2nd thread I created only after waiting for a responce on this forums section for 3 days...

nutz · 09-16-2009, 05:38 AM

lol, I am sure aeroforce (or anyone) could figure out the EMS telemetry (it in open format) but i dont think it would be economical for them to develope the software for such a small market, the AEM serial gauge is available but requires some "programing" skill and I have also seen some have writen programs for hand held style readers (I'll stick with my little lap top). if there is enough market maybe aeroforce could be swayed to develope one<<<<<<<<but ever ems set up is different

forcefedjunkie · 09-22-2009, 09:59 AM

Here in our forum it's been discussed here:

ems and scangauge

The big discussion was here:

Aeroforce that will work with the AEM EMS!

Todd