Interceptor "Pro" version

[COY]

Is it ready? Money standing by.

[Boosted SRT 226]

ya i want updated gauge!

[cali]

Todd,

Hats off to you dude!! for these parameters!! I can tell you've been busy!
Can you pull off requested tq parameter?


2. Exhaust temp. - this is a parameter calculated by the PCM which should be very useful, acting like an EGT sensor. I am installing an EGT sensor on my car to correlate the numbers. If anyone has knowledge of this parameter, I'd like to hear from you to better understand how it is calculated. On my car it ranges from 1100 at cruise to 1690 deg. F at WOT near redline. With some testing and validation with an EGT sensor, it should be a very valuable tuning aid.

5. Wastegate solenoid duty cycle - once PCM tuning software is available, this will be a parameter to watch to see what the wg/turbo is capable of delivering as well as how developing a tune for a certain boost level.

10. Air flow rate - calculated by the PCM, the amount of air in lbs/min the engine is ingesting.

11. Fuel temperature at the fuel rail



PS: Exhaust temp accuracy will also be affected by modified fuel system, map claps,exhausts, 02 housings and such devices. It's accuracy will depend on a 'stock' car, but for us with minimal mods on the Stage Kits, its gonna be damn near accurate!

[xmdfmk7x]

Any updates available? I'm looking to upgrade mine to the new one.

Kinda looking forward to seeing the MPG read-out

[IWantAn04]

iwant iwant iwant!

[forcefedjunkie]

We're going to spend the next 4 days incorporating feedback from those using prototypes. I think by late next week these should be ready to go. I'll need to come up an organized plan of handling returns for reprogramming as well.

Requested Torque. I'll look that up. Don't take this the wrong way, but how is this useful and do you know if mods effect it's accuracy?

Todd

[RTShadow]

bump bump bump!! haha, I feel like a kid waiting for his favorite comic to hit the shelves here! Is this baby ready to order or what? I haven't even driven my SRT4 yet but reading about this gauge gets me excited, because I'm a total stats junkie!

[19 psi]

Quote: Originally Posted by forcefedjunkie

Requested Torque, how is this useful

Todd

when your pointing at it and people are looking
as far as mods effecting it....... well stock is about 250lbs. after i upped the boost 6-7 psi with a WGA and put on an exhaust i gaind a good 80-100 lbs....

[snkmug]

I'm ready to order, drop me a pm when they are ready to go...I'd like to see what a green/black display one looks in an srt with stock guage lighting.....

[njshift]

Is it possible to get a somewhat accurate oil pressure or oil temperature reading from the srt pcm?

[Nick Chestnut]

Hi Todd,

I am also interested in getting the new version. I bought mine from you guys a few months back and I am currently having a problem with the bottom, right-hand corner of the display dimming out. If I tap the face of the gauge, it works again for a few minutes, then dims out again. Point being, I need to send it in either way. Please let me know what I need to do to get it fixed and updated! Thank you sir!

[COY]

Is it possible to send money now and be on the waiting list for the pro gauge? I think there will be a rush on new ones and people wanting to update the old ones and I dont want to be last in line.

[selp]

Quote: Originally Posted by COY

Is it possible to send money now and be on the waiting list for the pro gauge? I think there will be a rush on new ones and people wanting to update the old ones and I dont want to be last in line.

there is actually a waiting list ..

[gatekeeper]

I'm in line for an upgrade, most certainly.

[got_silver]

subscribed