My CEL came on this morning on my way to work. its the 2074 code which says its a vacume line leak. any ideas on where it is at? i haven't changes anything on the car for a few monthes... so not sure why i got the code.
My CEL came on this morning on my way to work. its the 2074 code which says its a vacume line leak. any ideas on where it is at? i haven't changes anything on the car for a few monthes... so not sure why i got the code.
I forgot to repost what i did....... not much really. i checked all the vacume lines. none where disconected or loose, while the car was running i couldn't hear anything. so, i reset the pcm by disconnecting the battery. hasn't come back on since so i am to assume it was just a one time fluk or something. it seems like the 05 pcm's throw more codes than the others do. i really want to upgrade to a stage 1 pcm to avoid most of the stupid codes......
P0633 which i know is because of the Mopar Stage one i ordered and the key isn't programmed to the ecu
P0038 is my o2 sensor which explains my catless downpipe
the P0517 code i don't know. did anyone else get this code? it's not listed and i don't know what caused it.
my car is a stage one with full 3" exhaust, intake and AGP wastegate. funny thing is that it's intermittent on boost. at 10psi, and half throttle it hauls. but anything after 12psi, it seems like it fuel cuts HARD! any help would be great. thanks.
nevermind. P0517 is the sensor for the battery heater. if you run an Optima battery and can no longer use the little wrap that goes around the stock battery, this code will appear.
p0480 - cooling fan control circuit
what does this mean. i don't think my fan is even turning on.
U110C - No fuel level Bus message
I have no clue
P0633 - Skim Key not programed
Something to do with the key but i've had the same key forever and it just popped up
P1105 - TIP sensor solenoid circuit
I have no clue on this one either
at least i looked mine up on my own. can anyone help me out
__________________
Black 05, Mopar Stage 1, Mopar 3 Inch Cat Back, Needswings DP v5, AEM CAI, Greddy TT, Hotchkis Lowering Springs, APG Waste Gate 17/14, ACT Performance Street Disc, ACT Heavy Duty Pressure Plate, ACT Pro Street Flywheel
the skim key code pops up only when you order your mopar stage whatever the fuck you order.
for your example Deporter (same as mine, read up a few posts) you must've ordered your stage one and stuffed it in your car. they're supposed to be flashed while your car is at the dealer. they won't cause drivability problems, so it's nothing to freak about. the 1105 Tip sensor i have no idea except check the sensor itself.
What does a P 0440 (General Evap System Failure) mean? Whats a fix for it?
Check the following:
1. Defective or loose fuel cap (checked this, clicked it several times...do I have to do something to clear it?)
2. EVAP canister or hose cracked/not connected
3. Purge or vent solenoid defective
4. Vacuum leak at engine
AutoForums.com is the premier network of enthusiast-owned
enthusiast-operated automotive communities.
We operate more than 100 automotive forums where our users consult peers for shopping information and advice, and share
experiences and opinions as a community.
CEL 2074 code
Linear Mode
