mopar bov (of course)

[InfernoSRT]

ok first let me apologize i did try to search this but i am a moron. i just installed my mopar bov it is on right the 2 holes point towards the intake and the hole in the plate faces away from the turbo. it does make a psssshhh noise but it also sounds like there is a free flow of air rushing from under my hood when i accelerate hard is that normal again sorry i am an idiot and i dont know anything about turbo's

[psi chick]

do you have a cai?

[InfernoSRT]

nope stock intake

[viper8315]

Did you install the gasket when you put the bov on?

[InfernoSRT]

yes between the blue plate and the turbo

[ebbtide]

You mean the turbo sound? that'll be a little more noticable with the bov installed, but not much. Did you remove any vacuum lines during the install that you didn't hook back up?

[InfernoSRT]

no no lines but it is like the turbo sound but 5 times louder so you are saying that is normal and i am just dumb?

[ebbtide]

Is you're boost normal (10-15 depending on stock or s1)? Does the engine pull as strong? It's probably normal.

[InfernoSRT]

yes just as strong boost levels seem normal i was just making sure it wasnt going to hurt anything i really appreciate your help

[InfernoSRT]

holy crap i was wrong i got to take it out on the autobahn and not only does it not get as much boost but the boost fluxes please help me i dont know what to do

[ebbtide]

take the bolts off and put em back in. make sure they're all tight. make sure the gasket is in place.

[InfernoSRT]

check did that but still having the boost problem

[Icemanthrilla]

u just gotta make sure theyre on super tight and that there are no leaks mine doesnt do that so dont worry u just gotta slap it on a lil tighter.

[IWantAn04]

i would use a little bit of gasket sealent along with it...make sure its on tight as hell

[InfernoSRT]

so it isnt likely that you can put it on too tight cause it is on tight but not real tight