many error codes after 50trim install

[vandido626]

i got all of the following codes after i thought i had finished the install of my 50 trim:

P0032 HO2S Heater Circuit High Voltage Bank 1 Sensor 1
P0038 HO2S Heater Circuit High Voltage Bank 1 Sensor 2
P0108 Manifold Absolute Pressure (MAP) Sensor Circuit High Voltage
P0113 Intake Air Temperature (IAT) Sensor Circuit High Voltage
P0118 Engine Coolant Temperature (ECT) Sensor Circuit High Voltage
P0123 Throttle Position (TP) Sensor Circuit High Voltage
P0335 CKP Sensor A Circuit Performance
P0522 Engine Oil Pressure Sensor/Switch Circuit Low Voltage
P0622 Generator F-Terminal Circuit

any help or info on how to solve these problems would be very much appreciated.

[Boggzey32]

Just from looking at the codes it might be a fuse blown. Since all the codes deal with sensors. Im not an expert but until one anwers your thread check for blown fuse's. Also you might want to post this in the SRT Dicussion or Performance/ Turbo Section were more people view.

[vandido626]

i checked and all fuses are fine
but it did get rid of some of the errors
i forgot which ones but yeah still
have most of them and car wont start

[srtowner]

Unhook the battery for a few minutes then hook it back up. Then recheck for codes. To me it looks like you either started the car or turned the key to the on position with some stuff unplugged.

[srtowner]

what else did you do to your car besides the 50 trim?

[vandido626]

hey thanks for the help but it turns out that my C2 module was loose and why it gave me all the problems but everything runs great now. any recommendations on where to get it tuned?