4"intake - SRT Forums

srt_wetness · 06-30-2006, 08:23 AM

hey guys i just got the gt3076 from agp and dtec and everything else i need except for an intake the inlate on the turbo is 4 in. and i know ams has one included in their kit but was wonderin if they would sell just the intake by itself.or if ayone else know wear i can get one would be greately appreciated.thanks,Kyle

noTe · 06-30-2006, 08:40 AM

I've already tried to buy a intake from them and they won't sell it seperate. You'll have to just buy a 4 inch coupler that goes down to 3 inches.

srt_wetness · 06-30-2006, 08:47 AM

yeah i figured that so did u end up using the 4x3 or makin ur own 4"intake

**canadian_made_srt-4** · 07-01-2006, 10:57 PM

ummm I had the same issue with the Ultimate Racing GT35R I bought a 90deg 4'' aluminum bend and thats all I had to use the filter is a K&N. You can plumb it right in to the fender well with the following 3-90deg bends, 3-18'' straight(you have to cut some off each) and a bunch of couplers and clamps.

A pic of mine this is how it sits you can just turn the factory battery siedways. I'm not done it will be plumbed closer to the stock location and a small dry cell is sittin under my bench. I just wanted to drive the damn thing

**canadian_made_srt-4** · 07-01-2006, 10:59 PM

oh wanted to add whats the point of having a 4'' inlet and restricting it with a 4to3 reducer you might as well get a 50trim. Just my 2cents

KeyboardCommando · 07-05-2006, 05:33 PM

I would like to do one too...

Maybe I'll call JMB and get the Ultimate in a 4" if he'll do it

centxdsm · 07-06-2006, 05:23 PM

Quote: Originally Posted by canadian_made_srt-4

oh wanted to add whats the point of having a 4'' inlet and restricting it with a 4to3 reducer you might as well get a 50trim. Just my 2cents

uhhhhh, um pretty sure the inlet tapers down as the inducer is a good bit smaller than a 3" pipe. You won't be restricting anything.

srt4moster · 07-06-2006, 11:39 PM

i made my own

srt_wetness · 07-07-2006, 05:04 AM

where did yall get ur pipe from?none of the exhaust shops have any 4" pipe around here.

Glacius · 07-13-2006, 08:51 AM

I've actually yet to see pics of the ams intake installed lol. Guess I get to see that in 2 days though when I have it back lol

Caric · 07-13-2006, 10:01 AM

Quote: Originally Posted by Glacius

I've actually yet to see pics of the ams intake installed lol. Guess I get to see that in 2 days though when I have it back lol

what kind of numbers did you end up making on the dyno?

HLFVIPR · 07-13-2006, 10:13 AM

I made my own!

Glacius · 07-13-2006, 10:38 AM

Quote: Originally Posted by Caric

Quote: Originally Posted by Glacius

I've actually yet to see pics of the ams intake installed lol. Guess I get to see that in 2 days though when I have it back lol

what kind of numbers did you end up making on the dyno?

they're not in charge of the tuning and all that on the car. They just built me one stout ass motor with port work, cams, blah blah and developed the turbo kit on the car. when it comes back here I have to redo the fuel system and engine management and then i'll put out some numbers. Looking to see low 600's without nitrous

HLFVIPR · 07-13-2006, 10:40 AM

Quote: Originally Posted by Glacius

Quote: Originally Posted by Caric

Quote: Originally Posted by Glacius

I've actually yet to see pics of the ams intake installed lol. Guess I get to see that in 2 days though when I have it back lol

what kind of numbers did you end up making on the dyno?

they're not in charge of the tuning and all that on the car. They just built me one stout ass motor with port work, cams, blah blah and developed the turbo kit on the car. when it comes back here I have to redo the fuel system and engine management and then i'll put out some numbers. Looking to see low 600's without nitrous

haha...I love your avatar!

Glacius · 07-13-2006, 10:43 AM

yea, it's definitely gangster