N2MB Racing/Phrozen 'Toy Box': Have Stg 3 no toys? stg 2 toys pcm? Click Here! - Page 9 - SRT Forums

phrozen · 02-27-2006, 01:50 PM

19 spots left on this group buy. Place your orders now. :-)

jacobsen23 · 02-27-2006, 08:35 PM

So, did you guys ever mail mine out, because I still havent recieved it. Just checking up on it.

phrozen · 02-27-2006, 08:43 PM

I don't think so. I believe Jay ran out of parts right before yours. I'll ask him about it.

topjimmy19 · 02-28-2006, 03:17 PM

Hey toybox owners, I just installed mine the HOM works, toggle on hammer it and it starts to blink (91 octane) . However my boost levels for Dab 1,2 or three dont seem to be any different they all end up around 19 psi (stage 2) do you think I screwed something up on the install . The lights work everything seems fine just can't tell a difference in boost levels ???? Anyone...

phrozen · 02-28-2006, 03:20 PM

Are the green and yellow LEDs turning on and off as you flip the switches?

I've been hearing this from several people now... Try rechecking your brown wire. Make sure it is in the right position, on the right connector. Also make sure the PCM pin is fully seated, see this post:
N2MB Racing/Phrozen 'Toy Box': Have Stg 3 no toys? stg 2 toys pcm? Click Here!

If that still doesn't help, try measuring the voltage on the brown wire in the respective DAB positions.

phrozen · 02-28-2006, 03:21 PM

Also, do you have an aftermarket WGA? Are your vacuum lines connected in the stock configuration?

topjimmy19 · 02-28-2006, 04:18 PM

I have the stock configuration for waste gate (stage 2), I'll double check the brown wire.

topjimmy19 · 02-28-2006, 04:20 PM

Lights all work

MrCleanSRt4 · 03-01-2006, 01:15 PM

anyway to get the ic sprayer to work?

If its the same pcm, is this feasible?

Can/are you going to add this later?

phrozen · 03-01-2006, 01:20 PM

The IC sprayer should work. It should be easy to add later. We haven't looked into doing this yet because the parts costs would be much higher and people might not be as interested. You'd probably need something like a single stage W/I kit with 4 nozzles, etc... The wiring would be pretty easy.

After we get this part settled down we'll look into doing an I/C sprayer kit if there is sufficient interest.

MrCleanSRt4 · 03-01-2006, 02:19 PM

I already have a WI pump and nozzles..

Thats why im asking

phrozen · 03-01-2006, 02:33 PM

Well, when I get some time I'll work on a prototype with you. I can fab you up a harness to connect to your pump and we'll see how it works.

Actually, I just looked at the schematic again, and it looks like they are doing something that isn't so bright there for the I/C sprayers. It's going to take a few parts to emulate it. Specifically the auto spray mode.

So, we'll probably need a new circuit board with another 1-2 switches...

Anyway, we'll talk.

Everyone else, don't forget the GB ends March 12th! After that the price is going up! Get your payment in now to save the $10. There are still 19 slots left for people not on the list already....

LORDHELMET_1 · 03-02-2006, 01:14 AM

Any testing on the Auto Sim for an 05 car with a stage 3 w/t

phrozen · 03-02-2006, 01:27 AM

No need. You've got the error codes, I've had someone verify that.

Beyond that, the code scrubber doesn't do anything that is year specific. I decide in my code what cars to allow it to work on and I specifically do not test the year character in the VIN number. I just verify that the car is an SRT-4 and then I allow it to work.

On the off chance that there is a problem, you can send it back and we'll fix it.

phrozen · 03-02-2006, 02:54 PM

Got your payment Scratchy. Thanks!

19 spots left...