1 of the 3 rocker switches does not click over like the other 2 if that makes sense. 2 of them have a definite on or off the other one just kind of pushes over to the other side. I have not installed it yet but want to know if this might be a problem before I do. Thanks guys.
some of them i did notice were tighter than others,i tested them though and electrically function perfectly.if however it does become a problem i will be more than happy to replace it
__________________
email for price quotes/questions!!!
Email: Jay@N2MB.com
5/24/09 9.30@154
1 of the 3 rocker switches does not click over like the other 2 if that makes sense. 2 of them have a definite on or off the other one just kind of pushes over to the other side. I have not installed it yet but want to know if this might be a problem before I do. Thanks guys.
its probably for the red led (hom). Mine is like that. I like it since you have to cycle through it to switch it on and off.
im out of boxes right now,jacobsen has the last box but if you dont mind i can make you one with a different box.it will be slightly bigger though.i can try to find the smallest job box i can.more boxes are on order
How much bigger is the other box. I would not mind another box if you could make it so I could add my own switches. could you make a box that just has the switch leads pig tailed out and I could use my own switches, actually I prefer that. It just needs SPST with a led right, three of them?
1 of the 3 rocker switches does not click over like the other 2 if that makes sense. 2 of them have a definite on or off the other one just kind of pushes over to the other side. I have not installed it yet but want to know if this might be a problem before I do. Thanks guys.
As long as the switches all stay put in their desired positions it should be ok. The clicking sound isn't important. Electrically it should work. Jay tests that before shipping.
How much bigger is the other box. I would not mind another box if you could make it so I could add my own switches. could you make a box that just has the switch leads pig tailed out and I could use my own switches, actually I prefer that. It just needs SPST with a led right, three of them?
I'm working on that in the new version. You'll be able to solder in your own wiring, switches and LEDs.
Technically, you'd want 2 SPST switches and one momentary. We're using 3 SPST switches because they match. Either way works well.
You'll also want 3 LEDs, each with approx 1k resistors in series.
You'll be able to use both sets of switches and LEDs at the same time, too. Of course, if either one is on, that switches function will be on.
Anyway, if you wait about a month, you'll get that version. Externally, it will look and function the same. Internally, it will have a PC board instead of hand-wired components.
How much bigger is the other box. I would not mind another box if you could make it so I could add my own switches. could you make a box that just has the switch leads pig tailed out and I could use my own switches, actually I prefer that. It just needs SPST with a led right, three of them?
i can make you whatever you want..if you want something custom pm me exactly what you want.obviously its going to be a little more than 89 shipped but let me know what you want and well take it from there
I'm doing a redesign on the toybox, which includes making up a PCB. That will take about 3 weeks to get in from the vendor. But, once we get all the stuff in we'll be able to build at least 100 of them much quicker than before.
So, about a month from now we'll be shipping lots of these.
Lets see some pics of where you guys are putting them. I want it easy to see and easy to use. Not looking to go stealth mode but dont want to just stick it on the top of the dash either.
Update: Rising parts costs, the addition of the circuit board and our decision to switch to priority mail (with tracking) are forcing us to raise the price to $99 shipped.
However, to be fair, we're going to extend the original price of $89 shipped to anyone on the list plus an additional 20 people.
The catch is that you need to get your payment in before March 12th. After that date or 20 additional people pay (whichever comes first), we're raising the price to $99.
So, act now and save $10.
We have parts for 144 units on order. The units ordered should be built, tested and shipping by the end of March.
The AutoGuide.com network consists of the largest network of enthusiast-owned enthusiast-operated automotive communities.
AutoGuide.com provides the latest car reviews, auto show coverage, new car prices, and automotive news. The AutoGuide network operates more than 100 automotive forums where our users consult peers for shopping information and advice, and share opinions as a community.
Linear Mode
