N2MB Electronic boost controller installation guide - Page 2 - SRT Forums

uncommon© · 06-05-2009, 09:50 PM

Quote: Originally Posted by phrozen

Same as shown here:
http://www.aempower.com/images/produ...%2030-2400.pdf

Ok, I'm installing my boost box tomorrow. I've already removed my stock solenoids, but I'm gonna use one of the ones I removed.

Now what port on the solenoid do we want to be the 'vent'? I can easily enough determine which ports on the solenoids are open without 12v and which 2 ports are open with 12v. Obviously one of the ports will be the inlet, but should the vent be the one that's 'open' to the inlet with or without 12v?

Hopefully you understand what I'm saying LOL

uncommon© · 06-05-2009, 09:52 PM

Quote: Originally Posted by phrozen

you'll need some vacuum lines... If you are going to leave the WOT Box harness on and install the boost box using a second harness, you'll need to bridge the red / black connection in the wot box harness so that the car can run without the wot box installed.

Ok, so do what? LOL

I have a wot box/2-step and I'm also adding the boost box. I have to solder together the red / black wires on the wot box harness??

never2muchboost · 06-05-2009, 09:57 PM

Quote: Originally Posted by uncommon©

Ok, so do what? LOL

I have a wot box/2-step and I'm also adding the boost box. I have to solder together the red / black wires on the wot box harness??

no leave the wotbox alone.. thats if someone wanted to convert their wotbox into a boost controller.

on the solenoid you will run the top port to pressure and tee it to the bottom of the gate. then run from the middle port of the solenoid to the top of the gate. just as you would any other solenoid... the middle port which usually goes to the wga on a stock setup will now become the nc port..make sense?

never2muchboost · 06-05-2009, 09:58 PM

i guess ill draw up a pic gimme a min

uncommon© · 06-05-2009, 10:01 PM

Ok, excuse myself as I'm running on fumes. I'm so god damn tired.

Top port to reference (turbo, UPP, etc.) and T'd into the bottom port

Middle port to top of wastegate

Bottom port to nothing.

Right?

never2muchboost · 06-05-2009, 10:07 PM

here nate

never2muchboost · 06-05-2009, 10:09 PM

Quote: Originally Posted by uncommon©

Ok, excuse myself as I'm running on fumes. I'm so god damn tired.

Top port to reference (turbo, UPP, etc.) and T'd into the bottom port

Middle port to top of wastegate

Bottom port to nothing.

Right?

exactly except dont use the upp come directly off the turbo

rico's-srt · 06-05-2009, 10:09 PM

thats an awesome diagram jay, as soon as my funds transfer ill be buying one, do they ship from florida or pennsylvania?

uncommon© · 06-05-2009, 10:11 PM

Quote: Originally Posted by never2muchboost

exactly except dont use the upp come directly off the turbo

Awesome, thanks Jay. I'll let you know how the install goes.

Thanks again!

never2muchboost · 06-05-2009, 10:13 PM

Quote: Originally Posted by rico's-srt

thats an awesome diagram jay, as soon as my funds transfer ill be buying one, do they ship from florida or pennsylvania?

i know its kinda cheesey but what do expect for paint

everything ships out of florida

never2muchboost · 06-05-2009, 10:15 PM

Quote: Originally Posted by uncommon©

Awesome, thanks Jay. I'll let you know how the install goes.

Thanks again!

you have my cell if you need me..kayla has a soccer game at 9 then a trophy ceremony and stuff but ill have my cell with me. spend some time tonight looking at the software so that you know what you are working with tomorrow

rico's-srt · 06-05-2009, 10:15 PM

Quote: Originally Posted by never2muchboost

i know its kinda cheesey but what do expect for paint

everything ships out of florida

so after i place the order it shouldnt take more than 2 days right? and it was better than the diagram phrozen posted up

never2muchboost · 06-05-2009, 10:18 PM

Quote: Originally Posted by rico's-srt

so after i place the order it shouldnt take more than 2 days right? and it was better than the diagram phrozen posted up

yep palm beach is pretty quick from tampa..ive seen stuff get there next day via priority. i didnt see what jon posted up but knowing him its probably pretty funny

rico's-srt · 06-05-2009, 10:19 PM

Quote: Originally Posted by never2muchboost

yep palm beach is pretty quick from tampa..ive seen stuff get there next day via priority. i didnt see what jon posted up but knowing him its probably pretty funny

well i assume he was being lazy and posted up an aem diagram, it was ok but not as good as yours

never2muchboost · 06-05-2009, 10:22 PM

ahhh ok i got ya now... yeah thats for the aem solenoid. still the same thing but yeah we needed to put that into laymans terms for the srt solenoid and explain which port does what