I see my water/meth injection as a failsafe! And, it is also nice with the way that gas prices are going! I think it is a cheap way to make sure that you are keeping your engine healthy!
and clean.
it helps keep gunk off your piston tops/valves, and keeps your components overall, clean.
if you install meth, do some runs, and go pull your sparkplugs and let me know how they look.
Everyone - Thanks for the feedback,I guess Meth is a little better then I thought.I wasn't really aware of all the advantages you guys are talking about now,keeping the knock down and cleaning the motor I guess were the two things I didn't know.
Time to order those couple parts for my meth kit and then that should be going in once the cars back!
__________________
LOOKING FOR THERMAL TURBO BACK EXHAUST - PM ME WITH WHAT YOU GOT!!!
Mopar STG3 w/t, 3inch TBE,HKS turbo timer,QWFMIC,mopar blue plate special,soon to be swapped for an HKS,AGP W/G,and 30PSI guage.Mopar CAI,and AEROSPEED Catch can.FBM ported race combo, Fidenza flywheel,and a 6puck clutch
Soon to come..cams and ported S3 turbo and mani
Nothing really yet Tim,I spoke with Sandra yesterday...she told me Ralph had just left and that she had not spoke with him about it,but she said Ralph and another guy by the name of Rick started working on it.She told me Maria would call me tomorrow (today) but I never got the call.LMK if you hear anything,thanks dude.
Nothing really yet Tim,I spoke with Sandra yesterday...she told me Ralph had just left and that she had not spoke with him about it,but she said Ralph and another guy by the name of Rick started working on it.She told me Maria would call me tomorrow (today) but I never got the call.LMK if you hear anything,thanks dude.
-Frazier
Keep us updated because it sounds like you had one hell of beast on your hands for a while.
*Update* Car is being taken care of as of right now,it has been gone for 2 weeks.Once I get it back (hopefully by the end of this month) I have to make minor adjustments then ill be installing my DO Progressive Kit,AEM EMS and puting it on the dyno.
So thats my story for now,keep you guys updated if I hear anything else.
well be at the dyno nearly the same time with close to the same set ups.....john you best set up an account for me and frazier with 10% going into it cause these puppies are going to sell like hot cakes after the forums see what a fully tuned 50lb wheel can do...
I cant wait for arron to say, "well there's more in it but its not safe to go further!"
well be at the dyno nearly the same time with close to the same set ups.....john you best set up an account for me and frazier with 10% going into it cause these puppies are going to sell like hot cakes after the forums see what a fully tuned 50lb wheel can do...
I cant wait for arron to say, "well there's more in it but its not safe to go further!"
You are 2 of 4 people getting ready to run similar set ups. Looks like there will be 4 more stage 3 big wheel cars from PTP in the top 10 this race season. Good luck on the dyno's guys, can't wait.
You are 2 of 4 people getting ready to run similar set ups. Looks like there will be 4 more stage 3 big wheel cars from PTP in the top 10 this race season. Good luck on the dyno's guys, can't wait.
count me in on the stage 3 50lb wheel upgrade as well! getting my taxes done this weekend and will be putting in my order asap. blacksrt311 will most likely be helping with the install, but if not he will at least be getting his hands dirty tuning it and putting down some numbers at the track!
Last edited by randallsrt : 03-13-2008 at 06:10 PM.
count me in on the stage 3 50lb wheel upgrade as well! getting my taxes done this weekend and will be putting in my order asap. Driver311 will most likely be helping with the install, but if not he will at least be getting his hands dirty tuning it and putting down some numbers at the track!
Sounds good and we have only one more in stock but there are 4 more getting done right now, so when your ready we should have what you need sitting on the shelf.
Did you have to custom a dump tube or use one from another kit? A local shop quoted me at $200 to make me one and if the AGP one works, I will just do that. I cant wait to get mine installed. It has been sitting here for weeks.
Did you have to custom a dump tube or use one from another kit? A local shop quoted me at $200 to make me one and if the AGP one works, I will just do that. I cant wait to get mine installed. It has been sitting here for weeks.
We have to build the dump tube for every kit. Yes they are $199 from us if you want the longer version dump tube. Thing being... ours are all stainless steel.
Linear Mode
