EBay UPP

[PsychoSRT05]

Anyone have this upp on their car? If so, how would you say fitment is, and is it a quality upp?

Thanks

[cavie187]

Do not have it on my car personally, but from the pic it looks like the block off plate is made out of aluminum foil. As long as the strength is there and it can hold up to the heat you really can't screw up a pressure pipe. It connects with chunks of silicon or rubber so it doesn't have to be exact.

From the looks of things I would say the welds are clean, but would also be weary of the quality of material used. If it starts to warp or leak it is useless to you.


good luck.

[PsychoSRT05]

Quote: Originally Posted by cavie187

Do not have it on my car personally, but from the pic it looks like the block off plate is made out of aluminum foil. As long as the strength is there and it can hold up to the heat you really can't screw up a pressure pipe. It connects with chunks of silicon or rubber so it doesn't have to be exact.

From the looks of things I would say the welds are clean, but would also be weary of the quality of material used. If it starts to warp or leak it is useless to you.


good luck.

I'm getting an Hks bov and a PTP BOP so I'm not worried about this bop. But it just looks like those couplers would make fitment pretty shameful.

[WTF?]

i know i planned in getting this one until i got a really kick ass deal from a member on here it looks decent to me

[reed32]

I Run It On Two Of My Shop Cars...................works Perfect. Just Jb Weld The Gromet Area Because Its A Little Too Big

[PsychoSRT05]

bump.