Agp Wga

[srt4crazy05]

Quote: Originally Posted by coltf1991

I did not mean a how-to for the heat sheild i mean for the WGA.

u quoted my very own how-to... its easy. undo the old one and reverse the process with the new one...

and to add to it cause i was just reminded by another poster in this thread... the heatshield will need some bending or cutting when its re-installed. it will need to be bent so it doesnt touch the wga arm. if it does u will boost very high. and u may want to notch it a lil to have easier access to the adjustment nut

[speed_box]

or if you dont want to take off the heat shield just cut enough so u can fit the wga arm in there...thats what one of my buddys did but just doesnt look to good

[srt4crazy05]

Quote: Originally Posted by speed_box

or if you dont want to take off the heat shield just cut enough so u can fit the wga arm in there...thats what one of my buddys did but just doesnt look to good

Quote: Originally Posted by srt4crazy05

u quoted my very own how-to... its easy. undo the old one and reverse the process with the new one...

and to add to it cause i was just reminded by another poster in this thread... the heatshield will need some bending or cutting when its re-installed. it will need to be bent so it doesnt touch the wga arm. if it does u will boost very high. and u may want to notch it a lil to have easier access to the adjustment nut

ahem...

[coltf1991]

How about I just leave the son of a gun off?

[grablife]

i just took mine off today and its a bitch. if u can cut it thats the way i would do it. on another note i believe his questions is on the install, there is a very good how to in the agp section called "the end all be all of agp wga" or somthing like that. print it and take it to the garage with u (its 3 pages). once u actually get into it the install itself will make sense. the vaccum lines might throw you but agp did a pretty good job at the description in the instructions on this site. good luck.

[coltf1991]

thank you Grablife

[Netou]

Quote: Originally Posted by coltf1991

By top heatshield you mean the stock one that covers the turbo?

Ummm no.......the heat shield they are talking about is the one that covers the exhaust manifold, not the turbo itself.


Hope you didnt dissasemble the turbo already.

[coltf1991]

Quote: Originally Posted by Netou

Ummm no.......the heat shield they are talking about is the one that covers the exhaust manifold, not the turbo itself.


Hope you didnt dissasemble the turbo already.

Ya the big silver flat one right behind and below the coil?

[srt4crazy05]

Quote: Originally Posted by coltf1991

How about I just leave the son of a gun off?

yeah. i have half a top heatshield. i had to cut it cause i stripped out one of the bolts

i know a lot of ppl that dont have a top or bottom...