Need help quick please. Car wont go into gear.

[DoodEdge]

I was having problems shifting into 3rd, the car would have to be @ or above the 3rd gear revs so I guess I had a problem with the shift selector.

Well, today I missed a gear punching on it pretty hard and now it wont shift into gear. I coasted a ways and parked her. Wont go into any gear. If I put it into the first position and let go it pops to the second gear position, same with if I put it in 2nd and let go it slides to 4th. It didn't seem to want to make it over to fifth or reverse.

I need parts. Shift selector? and 3/4 sync and fork just cause i had previous problems with them.

Help please.

[Srtbullet05]

had similar issue and had to replace the clutch and broke something in the transmission but cant remember what exactly broke.

[flatbroke139]

We just did a sift selector on my buddies car. Its is easy to check without pulling the trans. I sounds like either a shift selector of a shift fork maybe? Pull the cover off where the shifter linkage attaches to the trans. That will show you the shift selector, and the tops of al of the shift forks. There is a write up on this. You can even pull your assembly out your wheel well, without pulling the trans to re-do the entire trans, because Dodge knew what they were doing when they put this car together.