Car Doesnt move in any gear (not an axle) - SRT Forums

EvilSRTMo · 06-23-2009, 05:48 PM

The other day I was racing from a roll (2nd gear 40mph), I floored it, and all of a sudden ,nothing. No noises, no grinding, no vibration when put into gear, and it actually feels a little easier to enter each gate of each gear. I checked my axles, intermediate shaft, and all splines on each component. I dont know exactly whats wrong. I am guessing either a blown LSD or a broken shift fork. Does anyone have a guess at what it could be? Thanks

uncommon© · 06-23-2009, 05:49 PM

You were IN a gear & then it wouldn't move? Or you were shifting INTO a gear and it won't move?

EvilSRTMo · 06-23-2009, 05:54 PM

as I shifted into third my car just started rolling instead of being driven

aceofspades9587 · 06-23-2009, 06:03 PM

sounds similiar to what happened to mine, I blew my clutch and my axle at the same time... haha.. so prolly your clutch.

AllBoost · 06-23-2009, 06:05 PM

shift selector if you cant get the car into any gear now. if not then maybe a shift fork

EvilSRTMo · 06-23-2009, 06:08 PM

Quote: Originally Posted by aceofspades9587

sounds similiar to what happened to mine, I blew my clutch and my axle at the same time... haha.. so prolly your clutch.

Sorry bud, just installed the clutch 2 weeks ago.

EvilSRTMo · 06-23-2009, 06:10 PM

Quote: Originally Posted by AllBoost

shift selector if you cant get the car into any gear now. if not then maybe a shift fork

It feels like it still goes into gear at the shifter, but it seems a little easier than usual. Can I see the shift fork and selectors if I pull that cover off where the shift linkage is?

uncommon© · 06-23-2009, 06:11 PM

If it feels a little easier then it's probably the shift selector. Just unbolt the shift selector & look for the broken off piece.

If it's not the shift selector my bet would be on the input shaft, but it's probably the shift selector.

aceofspades9587 · 06-23-2009, 06:15 PM

well then ill go with everyone else, try the shift selector. :P

desertsoldier22 · 06-23-2009, 06:19 PM

Good excuse to get a billet selector

EvilSRTMo · 06-23-2009, 06:26 PM

Quote: Originally Posted by desertsoldier22

Goog excuse to get a billet one

Damn Straight :p

EvilSRTMo · 06-24-2009, 06:17 PM

Sure enough, I pulled the cover and there it was, a broken shift selector. Thanks for the help guys.

rlpsaleen · 10-03-2009, 11:08 AM

i had a broken drivers side axle put a new one in and let the car down on the ground put it in reverse to back it out and it wont move any ideas? after that i put the car up on jack stands and the driver side will turn as long as there is no weight on it ,put my foot to try to stop the tire from spinning and it about ripped my foot off if any body can help let me know?. thanks ricky