Quote: Originally Posted by SILVERFLASH
A couple of months ago I had sent in my clutch RA # 84 I had installed the torque plate in the wrong side of the flywheel. I paid for my mistakes, you charged me like 300 to repair. After installing the rebuilt clutch it was slipping, you advised me to wait out the break in time after 600 miles it was slipping so bad i could barley make it up a hill. The clutch was sent back with RA# 73X. The clutch had a bad pressure plate. This clutch has been in for 3000 miles and is slipping again. It slips under high load. My car only dynos at 295 hp 345tq I have tried adjusting the clutch peddle in 1/8 inch increments with no luck. It cost me 43 dollars to send the clutch to you when it was your defective product and i was never compensated for my expenses. I really just want a clutch that works. I am a solider in the US Army getting ready to deploy to Iraq again and really just want to enjoy my car wile i am here. Thank you SSgt Alan Hampel
I sent this to Clutchmasters on the 25 of may and had no response.
The clutch is a Stage 4 with aluminum Flywheel
I will look in to this and pm you asap.
Please Help
Linear Mode
