mopar stage 3 hom kit varicool controller settings

[srt-sparkle]

whats the settings on the varicool controller on your mopar stage 3 hom kit. And how should it be set on the varicool controller?

I have mine set to spray as soon as i hit 1psi for the low switch on the dial and for the high switch i have the setting on 21 and in the center on the tune dial i have it on 10? Is this correct setting to have to have? The weather is fairly mild.

[pphilps]

WOW... you are sprayig lots then huh! I remember seeing before that most guys are having it set to come on at 16 and going full by.... well that depends more on your can to hold the HOM......

But it also depends on the type of fuel you are using ect.....I would start spraying around 16 though as the fuel system can handle up to there with no problem at all!

[boostjunky]

i start at 7 psi on the low and 21 on high. Center is at 8 when i am on pump. On vp Q16 i run the same except the center is on 6 this is also with a 90 meth 10 water using Vp M1 meth

[csufdrew]

there is no need to run Q16 and 90% meth

Unless your running a GT35 or some shit...but even then just C16 will suffice

[boostjunky]

I have 54 gal drum of Q16 sitting in my garage and a 30 gal of m1 for my built motor project. So i fig i might as well use some of it The Q16 is the same price as Vp c16 just a better fuel