My Fuel pressure goes from 43psi when I prime the pump to 0 after it is done priming(maybe 3 second).
My stock FPR is actually loose, but the two orings ARE on. But I did put some grease on the oring to go in smooth, could that be a problem?
I think Im going to check this out tomorrow and maybe if I could find some nails lying around, add them to tighten up the connection.
__________________
FS: HID Fogs Kit - 6000K & 3000K(Yellow) - PM Me
Performance Mods: AGP S3D 48lb - Returnline - Mopar Stage 2 w/o Toys - DW 650cc - TurboXS HPMBC - Maddog STS - MaxxFab 3" DP w/o Cat Magnaflow Muffler - AIS Intercooler - ED LPP - ED UPP w/ HKS BOV - Injen Intake - NGK V-Powers @ .032 - FBM Ported Intake Mani/Spacer - DCR 55mm Throttle Body - DCR Oil Mod - Devils Own MethInjection, M5 - DTEC - AEM UEGO
385HP and 385TQ
|
Linear Mode
