2.2L fuel injectors....upgrade?

[boogaloo shrimp]

i was reading flow charts and saw that dodge 2.2l injectors are 746cc flow.......
anyone know about this.......

is this a potential upgrade instead of going rc 750?

will they fit?

[boogaloo shrimp]

also check out the 3.2l engines from 98-99 these look exactly like stg2.....anyone find info on these, i can't?

http://cgi.ebay.com/ebaymotors/3-2-Chrysler-Dodge-98-99-Fuel-Injector-s-NICE_W0QQitemZ350132586642QQcmdZViewItemQQptZMotor s_Car_Truck_Parts_Accessories?hash=item35013258664 2&_trksid=p4506.c0.m245&_trkparms=72%3A727|65%3A12 |39%3A1|240%3A1318

[Sarguy01]

link to flow chart? that is a lot for a factory 4cyl.

[boogaloo shrimp]

71.0 746.2 536.8 43.5 3.00 71.00 746.2 157 187 149 177 135 160 120 143 109 129 99.6 118 - Low Chrysler 2.2l


Stan Weiss' - Electronic Fuel Injector (EFI) Flow Data Table

it's low impetance .......

these are for dodge turbo 2, 3 , 4 and then there's the super 60, which is like 60 lb/hr

[Sarguy01]

Quote: Originally Posted by boogaloo shrimp

71.0 746.2 536.8 43.5 3.00 71.00 746.2 157 187 149 177 135 160 120 143 109 129 99.6 118 - Low Chrysler 2.2l


Stan Weiss' - Electronic Fuel Injector (EFI) Flow Data Table

it's low impetance .......

these are for dodge turbo 2, 3 , 4 and then there's the super 60, which is like 60 lb/hr

you have to buy an injector box for those as well. they are not made to work with our cars.

i only see that data under rc engineering...not chrysler.

[boogaloo shrimp]

i cant find the flow for the 98-99 3.2l injectors,,,,they look like our stage 2's

[boogaloo shrimp]

Quote: Originally Posted by Sarguy01

you have to buy an injector box for those as well. they are not made to work with our cars.

i only see that data under rc engineering...not chrysler.

look under bosch......hit ctrl+f and type in 746.2 it'll find it for you

[NeonDan]

dont bother....

[Sarguy01]

Quote: Originally Posted by NeonDan

dont bother....

thats what i was thinking. my general rule of thumb is that this car has been out long enough that someone would have tried it already and a lot of people would be running them if they worked.

[srt403]

chrysler 2.2 injectors are not 746cc -not even close.

They are are 2.4 ohm. low impedance and take the bosch style injector harness plugs. so they are not a drop for the srt-4.
Plus they are all rated at 55 psi (not 43 like most aftermarket)
at 55 psi this is waht they are rated

stock early t-1 28 lb/hr
late t-1 and t-2, t-3, t-4 33 lb/hr
mopar performance +20's 42 pph
mopar performance +40's 52 pph

I do sell some sema deikens that are plug and play for the srt-4. They are 600 cc at 43.5 psi, and at the factory psi of 58 thery are rated close to 691 cc
price is $259 a set

later,
Cindy

[boogaloo shrimp]

hmmmmmmmmmmz

[NeonDan]

thanks cindy....and are those like plug in and drop ins?