3076r with all sup. mods. what cams?? HELP! - SRT Forums

mpotisrt4 · 08-13-2009, 09:25 AM

well its time for cams. i have agp kit with gt3076r, and all supporting mods.5 layer headgasket,will have springs, titanium retainers,gears ect... what is the best cam 4 the car? drive it alot. also planning on going to the strip once in awhile to mess around.here r my dyno #'s now. what do you think i can expect to see in hp and tq gains from your recomendations? thanks for any advice i can get. im not one to make quick decissions on things, just like to do the right thing the first time.

nutz · 08-13-2009, 10:30 PM

without a race port i would go with a medium cam 12's, 14's BC 2, that way you will get the topend without sacrificing your DD low end power and throttle responce

uturner · 08-13-2009, 11:30 PM

Which turbo kit is that?

mpotisrt4 · 08-14-2009, 05:49 AM

^^^^^^^^^^^

Turbo_SRT_05 · 08-15-2009, 12:31 AM

gt3076r. i would personally go with the bc stage 3s. it would be dumb if you didnt port the head when you take the cams out. A good port and polish could give you 45-70 wheel with a tune and with methanol maybe even more.

mpotisrt4 · 08-15-2009, 05:52 AM

i forgot to put that i am getting port and polish.

boostedsohc · 08-15-2009, 11:05 AM

crane 14 modern has 2 sets. 350..

redhotneon · 08-15-2009, 04:27 PM

those numbers on pump?

mpotisrt4 · 08-16-2009, 08:18 AM

108...........................

**tgspeedracer** · 08-16-2009, 10:33 AM

I have bc 3's and daily driveability is great. and they have good top end power

turbo666 · 08-16-2009, 04:18 PM

I have 14's with my 30r on stock head. I have a All Motor Mike extreme port head with +2 exhaust and +1 intake sitting in back of shop along with a set of Crane 18's. I don't plan on putting those two things to use until I build the bottom this winter.