2.0 Camshaft Help!!! Please!!

[MoparNeonSRT4]

Ok i bought some 2.0 camshafts off of a guy on neons.org. Im trying to figure out which cam is which. One cam has a green ring in the middle stamped with a 532 and a 219 which im thinking goes to a 2.4 but not sure. The other one has a red ring in the middle and stamped with a 674 or 2776. Can someone please help me and tell me if these are for a 2.0 and which one is exhaust and which one is intake!!

[rasp]

The intake cam will be the only cam able to accommodate the cam magnet in the end of it...

You cannot put the cam magnet in end of the exhaust cam.

[MoparNeonSRT4]

[quote=rasp;7932419]The intake cam will be the only cam able to accommodate the cam magnet in the end of it...

You cannot put the cam magnet in end of the exhaust cam.[/quote


Ok,but what im really trying to figure out is if the intake cam that i ahve is from a 2.0 or a 2.4?

[MoparNeonSRT4]

Ok..so i just read the whole 16 pages of the swap. Now should i just swap out the exhaust camshaft with the 2.0 and leave the stock intake camshaft in there or should i swap both for the 2.0 camshaft?

[tim421165]

Quote: Originally Posted by MoparNeonSRT4

Ok..so i just read the whole 16 pages of the swap. Now should i just swap out the exhaust camshaft with the 2.0 and leave the stock intake camshaft in there or should i swap both for the 2.0 camshaft?

if your going to swap do both ....

[gotbst05]

Quote: Originally Posted by tim421165

if your going to swap do both ....

agreed