Hahn 20g/16g owners? Post your dyno and setups here!

[tgspeedracer]

you should be about stock fp which is 58psi, what injectors are you running?

[maxxpsi]

running with stage 2 inj, fpr set 50psi, would 58psi kill the fuel pump, or should i go with 750rc i heard its over kill, but wont it better to be over than under,

[maxxpsi]

so with currunt mods should i go with 650 or 750 they both are the same in price..plan to run 23 to 24psi

[daniel427ss]

Quote: Originally Posted by maxxpsi

so with currunt mods should i go with 650 or 750 they both are the same in price..plan to run 23 to 24psi

ive seen many ppl go from 750s to 650s, 650s is enough for 23 24psi, hell stage2s are good for 23 24psi ,(thats how im running) fpr set at 50 but i just set it back at 44 cuz i think i was pushing it alot,

ohh 58 is stock fuel pressure, its not going to kill ur pump-that is if its static fuel.

around 40s is good for a boost source on your fpr

[maxxpsi]

hmm i think i may go with the 650s thanks for the info!!

[Mrcho]

Hey guys! Would my Iceman CAI fit on this turbo???

[Mrcho]

oh BTW Im looking foward getting this kit (s20g) probably this week and I read a lot on it .... what do you guys think I could be making with these mods:

s20g, upgraded wga boost around 25psi, s2 w/o toys pcm, zex nitrous 85 shot, fmic, afc, rc 750, ebc, cai, 3" downpipe no cat w/ cutout, walbro255, fpr

My guess: 380whp without nitrous, 460whp with nitrous

Oh, still stock internals

Also what do you think I should get/buy/install along with this kit or I gots everything?

I have other mods like clutch flywheel mounts etc. that I didnt list up there, I just typed perf mods...

Also what do you expect out of that setup on drag ?? ... Personally I hope for high 11's without nitrous and mid-low 11's with nitrous, do you think that's possible????

[tgspeedracer]

Quote: Originally Posted by Mrcho

Hey guys! Would my Iceman CAI fit on this turbo???

That is the same intake I run and yes it will work

[Dumetre]

Quote: Originally Posted by Mrcho

oh BTW Im looking foward getting this kit (s20g) probably this week and I read a lot on it .... what do you guys think I could be making with these mods:

s20g, upgraded wga boost around 25psi, s2 w/o toys pcm, zex nitrous 85 shot, fmic, afc, rc 750, ebc, cai, 3" downpipe no cat w/ cutout, walbro255, fpr

My guess: 380whp without nitrous, 460whp with nitrous

Oh, still stock internals

Also what do you think I should get/buy/install along with this kit or I gots everything?

I have other mods like clutch flywheel mounts etc. that I didnt list up there, I just typed perf mods...

Also what do you expect out of that setup on drag ?? ... Personally I hope for high 11's without nitrous and mid-low 11's with nitrous, do you think that's possible????

With 25-26pi you will be making more than 380 and will def need racegas. What are you going to use for tires to run those times? It will take 26psi with racegas and drag radials to run high 11's without n20. On the street without w/i or racegas (93 oct) I run 21psi which you could then spray your full 85 probably or when you go to the track with racegas and more boost change to like 35hp jets.

[BadCupid69]

I'm looking at the 20g from modern with the port fueler...What kind of times are you guys running. I want high 7s in the 1/8 and high 11s in the 1/4.
I'm looking at stage 3 as well just not sure which one....

[tgspeedracer]

i ran 12.2 at 115mph, 7.9 1/8th 400whp 91oct with water injection 26psi

[alex209]

whats up, i have the 16g turbo set up . and i need more boost for my tune since iam only at 16 punds with the kinetic wastegate the 16g turbo caME WITH .. i said hans MAKES a 26 psi wastgate thats for the 16g and 20g.. how did u order that and how much.. or is there any other wastegate with a better boost level that fits on 16g.. help asap... i need this wastegate so i can retune my car for over 18 pounds..

[nutz]

Quote: Originally Posted by alex209

whats up, i have the 16g turbo set up . and i need more boost for my tune since iam only at 16 punds with the kinetic wastegate the 16g turbo caME WITH .. i said hans MAKES a 26 psi wastgate thats for the 16g and 20g.. how did u order that and how much.. or is there any other wastegate with a better boost level that fits on 16g.. help asap... i need this wastegate so i can retune my car for over 18 pounds..

hahn sells em for 180

[alex209]

Quote: Originally Posted by nutz

Quote: Originally Posted by alex209

whats up, i have the 16g turbo set up . and i need more boost for my tune since iam only at 16 punds with the kinetic wastegate the 16g turbo caME WITH .. i said hans MAKES a 26 psi wastgate thats for the 16g and 20g.. how did u order that and how much.. or is there any other wastegate with a better boost level that fits on 16g.. help asap... i need this wastegate so i can retune my car for over 18 pounds..

hahn sells em for 180

i called em and i think the turbo builder didnt want to help me out .. he said the wastegate i have on the 16g the stock on is good for over 18 pounds.. bullshit i suppose sine iam only at 16 pounds and iam maxed out on wastgate.. so DO u guys no the exact name for the wasegate so i can give him a idea of what wastegate it is that i need .. for my 16 g iam looking for at least a 18 pound hold... or 17 .. i hold 14 at redline

[yzguy128]

18lbs?

you need some fuel and then crank that puppy up. I'm running 24lb spike holding 20~21 to redline. I have an EBC though but I am using the stock WGA that came w/ the kit. I have the 16g too!