Hahn 20g/16g owners? Post your dyno and setups here!

[daniel427ss]

Quote: Originally Posted by 909Sxt

I wana say for some reason 44lbs

i still dont see why only managed to get 370Hp even with the 49lb wheel

my car (with previous owner) just had stg2 n the 20g n did 402hp

anyways, hope u sell it. but ur not selling the car huh?

[up_in_boost]

Anybody got anymore dyno's?????? post mod list too, that was accomplished with too

[AltersEgo]

I should have my car back this Friday with the rebuilt motor. I'll have to put some miles on it before I can hit a dyno.

[401tuner]

question for you guys, im looking into selling my new FBM ported E1 and picking up a Hahn 20g kit. But I was planning on using stage 2 injectors on a stage 1 PCM on 93 octane pump gas and watching my A/F's. I have a AGP intake, MPX TBE, MPX BFMIC, AGP cold side pipe with turbo XS bov, TB ect.

[yzguy128]

I'm running stage 1 comp, DW 650s, and water injection and I can run 24-25lbs and be at 12.5 top of 3rd and 11.5 top of 4th gear. No tuning, no map clamp. Car runs great! It took stage 1 a little while to get the hang of the bigger injectors. Car ran like shit for the first 2 days.

[909Sxt]

Quote: Originally Posted by daniel427ss

i still dont see why only managed to get 370Hp even with the 49lb wheel

my car (with previous owner) just had stg2 n the 20g n did 402hp

anyways, hope u sell it. but ur not selling the car huh?

what boost was this achieved at? computer controlled or wastegate controlled? for me this was achieved with stg 0 @ 24lbs

[daniel427ss]

Quote: Originally Posted by 909Sxt

what boost was this achieved at? computer controlled or wastegate controlled? for me this was achieved with stg 0 @ 24lbs

25 psi stg2. wait this was on 105 octane.

[vegasDSM]

still sellin my 20g kit... just got a stock turbo and manifold (and 02 housing).....

should be available in 14-20 days (still have to source some random bolts and feed/return lines...)

cheers...

p.s. stage 2 injectors and stock fuel system is prolly only good for 18psi (as you'll be close to 90% injector duty cycle (and you dont want to go over 80% to be safe))

[up_in_boost]

How close has anybody gotten to 400HP with the 20G without race gas, and at what PSI?

[Dumetre]

400whp without racegas is definately going to take some meth.

[up_in_boost]

Quote: Originally Posted by Dumetre

400whp without racegas is definately going to take some meth.

So what's the highest HP i can get just running 91Oct with FMIC, CAI, Downpipe open/no cat, Agp hardpipes, Syncronic BOV? Oh Yeah i almost forgot, i have the portfueler.

[vcious]

Quote: Originally Posted by up_in_boost

So what's the highest HP i can get just running 91Oct with FMIC, CAI, Downpipe open/no cat, Agp hardpipes, Syncronic BOV? Oh Yeah i almost forgot, i have the portfueler.

+/-350whp,22-23psi on staight pump. to break 400 your gonna need meth inj. or racegas. have to run the boost pretty high like 27-28psi

[SunburstkillerSRT]

Hey everyone... Im gunna be new to the Hahn 20g in about a weeks time now... I was tryin to figure out what kinda power I will be making from this kits.. Heres my mod list
Stage 2 w/o toys, Intercooler, hardpipes, Full fuel setup (return, fuel feed, bottleneck, rail) Meth injection, 60mm throttlebody, Ported Intake manifold, 3 inch exhaust turboback, Coldair intake, Wires, plugs, Afc tuner, AVC-R electronic b/c, aftermarket clutch.... I wanna make big power with it hoping you guys could give me feed back...

[vcious]

what do u consider big power?

[SunburstkillerSRT]

for me another 100whp would be nice... im making 320 stock turbo