Is the Vari-Cool light supposed to blink rapidly?

[mcduuuugal808]

When spraying, it's solid, but other than that, it blinks really fast, is this normal?

[tusamni]

I believe that is normal. And if you turn the min knob above the max knob, it turns the vari-cool off.

[mcduuuugal808]

Quote: Originally Posted by tusamni

I believe that is normal. And if you turn the min knob above the max knob, it turns the vari-cool off.

when it is off, is it supposed to blink slowly?

[tusamni]

Mine does yes.

[mcduuuugal808]

Quote: Originally Posted by tusamni

Mine does yes.

thanks alot man.

[Coolingmist]

Hi, I am a little confused, I answered this exact question for you in detail the other day in another thread.

here is the link:

CoolingMist W/I & Trunk Mount Reservoir HOW-TO is down!

here is the quote:

Quote:

We have different versions of controllers. Our latest at the time of this print is our Version 3 controller. This controllers led will function in several ways:

1) at system power up the LED will blink slow for a few seconds. Once it passes the test the LED will blink fast.

2) When the system sends power to the pump the LED will turn solid.

3) When the Max is lower than the MIN the led will blink fast for a few seconds, go solid for a few seconds and then go back to blinking again. This means the system is disabled.

4) When you are in configuration mode with our software (using your laptop or our pocket pc commander) the system will blink slow).

Thanks!

[mcduuuugal808]

Quote: Originally Posted by Coolingmist

Hi, I am a little confused, I answered this exact question for you in detail the other day in another thread.

here is the link:

CoolingMist W/I & Trunk Mount Reservoir HOW-TO is down!

here is the quote:



Thanks!

you know what, I totally just looked right over that for some reason in that thread! well thanks anyway, and not sure If you seen, but I made a how-to for everybody thats been bugging you for it. hehe including me.

[Coolingmist]

where is your how to?

[mcduuuugal808]

Quote: Originally Posted by Coolingmist

where is your how to?

in approved how-to section, replace the old non-working one

HOW-TO: Install Coolingmist W/I Trunk-Mount

[Coolingmist]

Ok, you did a nice job. With your permission (or maybe even without) I may convert this to a PDF and include with our kit.

[mcduuuugal808]

Quote: Originally Posted by Coolingmist

Ok, you did a nice job. With your permission (or maybe even without) I may convert this to a PDF and include with our kit.

ok with me.
I might try and spruce it up a bit in that case.

[Coolingmist]

Quote: Originally Posted by mcduuuugal808

ok with me.
I might try and spruce it up a bit in that case.

I just wish you used the straps, because I cant show that picture since its velcro